Hi John Bruer,
Thank you for your help. From snmpcol.trace, there are really some useful
information. I have noticed several log about collecting the specific NOKIA MIB
value. But I don't understand it really, let alone how to debug it.
########### Beginning##########
The log says:
Thur. Aug 14 15:29:39 : Deferring SNMP collection of NokiaCPUUtility.0 on
10.10.30.200 60 minutes (1.00 hours). Consecutive deferral #1.
################ End #################
Why should the collection be deferrd for one hour? and What the meaning of
"Consecutive Deferral #1"? Are there going to be #2, #3, etc.?
In command line, simply using the command "snmpget 10.10.30.200
.1.3.6.1.4.1.94.1.21.1.7.1.0" or "SNMPWALK 10.10.30.200
.1.3.6.1.4.1.94.1.21.1.7.1", the value can be retrived. There is no doubt about
it. But why the silly mib data collector can't?
Scatching my head , now , is not enough for me, I'd like to scatch the head of
MIB-DATA_COLLECTOR!!!
Best Regards
Bruce Yang
0086-755-267432743
hbyang@sysway.com
======= 2003-08-14 06:59:00 您在来信中写道：=======
>"Haibo Yang" <hbyang@sysway.com> writes:
>> Hello, list.
>>
>> Netview 7.1.3 on Win2000 Pro with Pack 2
>>
>>
>> I have modified \usr\ov\conf\snmpcol.conf and a new entry was added
>> to collect "the current percetage of CPU untiliztion". The following
>> is the content of the snmpcol.conf
>>
>> MIB .1.3.6.1.4.1.94.1.21.1.7.1 0 NokiaCPUUtility units TIMETICKS R ibmbackup
>> C 10.10.30.200 0xffffffff 120 > 40.000000 <= 35.000000 s 58720263
>>
>> The last entry here is supposed to collect the cpu utility data from
>> nokia box.
>>
>> In command line, I can use \usr\ov\bin\snmpwalk or snmpget to get
>> this specific mib value.
>
>Just to verify, make sure you can do those two without specifying a
>community string on the command line. This ensures NetView is using
>the right community string.
>
>> My problem is that In the MIB Data Collector window, when I click
>> the "data" button, it is empty!!! You know, the collecting interval
>> is 120 seconds and there is a long enough period of time for netview
>> to get some data.
>>
>> Any one here can tell me why there is no data collected by the MIB
>> Data Collector? Are there some ways to make it collect the MIB value
>> I want?
>
>I've fought with such problems in the past myself...often scratching
>my head as to why it was occuring because everything looked fine, yet
>no data ever showed up.
>
>At least in the AIX version, there's a log file that's pretty helpful
>for debugging this though. /usr/OV/logs/snmpCol.trace
>
>You may have to toggle it on. In AIX, that's done through
>serversetup. YMMV, and I am not familiar with the windows product.
>
>--
>jb
= = = = = = = = = = = = = = = = = = = =
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|