Anabella,
First, I'd suggest to install 1.2.1 as it's the latest + there is an
efix
for the 1.2.1 that you should load.
The problem is most likely a missing link. Check the readme for creating
the softlink that is missing for libcrypto.
If you can't find it - send us back the results from
ls -l /usr/lib/*crypto*
We can check to see if it's the link issue.
Greg
-----Original Message-----
From: Anabella_Gonzalez@banesco.com
[mailto:Anabella_Gonzalez@banesco.com]
Sent: Thursday, August 28, 2003 16:07
To: nv-l@lists.tivoli.com
Subject: [nv-l] Switch Analyzer daemon error.
Red Hat Intel 7.2
Netview 7.1.3
Framework 4.1
Switch Analyzer 1.2
We were testing Switch Analyzer on linux, the installation worked fine, but
when it finished, the daemon itsl2 was not running, I ran: ovstart itsl2
and displayed the following error: exit status: exit(127), and the daemon
it's not running.
I checked the log directory, but it's empty.
What can we do?????
Any information would be appreciated.
Thanks In Advance
Anabella Gonzalez D.
Banesco Bank.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|