Two thoughts on this...
Are you quite sure that your SNMP community names permit writes as well
as reads???
With the windows MLM, you also need to do an SNMP set to ensure that the
running MLM configuration gets saved away - have you done this?
Cheers,
Jane
tivoli wrote:
hi there list!
I have this:
netview 7.1.3 on w2k and 7 MLMs on w2k
I configured mlm with snmp set and by editing config file
....................a piece of
smmlmcurrent.config............................
smMlmFilterDefaultAction = 1
smMlmFilterTrapReception = 1
smMlmFilterTcpTrapReception = 1
smMlmFilterUdpTrapReceptionPort = 162
smMlmFilterTcpTrapReceptionPort = 162
smMlmAliasName[NV10.13.2.37.1] = "NV10.13.2.37.1"
smMlmAliasState = 3
smMlmAliasList = "10.13.10.1 10.13.10.100 10.13.10.101 10.13.10.108
10.13.10.124 10.13.10.132 10.13.10.146 10.13.10.15 10.13.10.150
10.13.10.151 10.13.10.156 10.13.10.16 10.13.10.19 10.13.10.2
10.13.10.20 10.13.10.21
10.13.10.23 10.13.10.30 10.13.10.31 10.13.10.33 10.13.10.34 10.13.10.35
10.13.10.36 10.13.10.37 10.13.10.38 10.13.10.40 10.13.10.50 10.13.10.54
10.13.10.72 10.13.10.76 10.13.10.85 10.13.10.86 10.13.10.87 10.13.10.88
10.13.10.90 10.13.10.96 10.13.15.1 "
smMlmTrapDestinationName[NV10.13.2.37] = "NV10.13.2.37"
smMlmTrapDestinationState = 3
smMlmTrapDestinationHost = "10.13.2.37"
smMlmTrapDestinationMask = 254
smMlmTrapDestinationActivationTime = " "
smMlmTrapDestinationActivationDayOfWeek = ""
smMlmTrapDestinationDeactivationTime = " "
smMlmTrapDestinationDeactivationDayOfWeek = ""
smMlmStatusMonitorName[NV10.13.2.37.1] = "NV10.13.2.37.1"
smMlmStatusMonitorState = 3
smMlmStatusMonitorDescription = ""
smMlmStatusMonitorAddressFamily = 2
smMlmStatusMonitorGroup = "NV10.13.2.37.1"
smMlmStatusMonitorFrequency = "300s"
smMlmStatusMonitorTimeout = "2s"
smMlmStatusMonitorMaxAttempts = 3
smMlmDiscoveryState = 2
smMlmDiscoveryBroadcastSearch = 3
smMlmDiscoveryBroadcastSearchTime = "12:15"
smMlmDiscoveryBroadcastSearchDays = "all"
............................................................................>
..........
-now, netview receive from MLMs traps about nodes status up or down
-netview doesn' t ping anymore MLM's nodes so I'm sure the MLMs are
working
-I know that when netview makes a poll to a MLM it does some snmp
gets and
also snmp sets (to upgrade mlm configurations )
-in my case I installed ethereal, listen the net and I don't see any
snmp
set! only gets from each MLM. what's wrong? the community names are good
the aliaslist never gets updated ! so, I have to do it manually??!!
it's absurd!
(I manually did some sets, and I never received a trap for bad
community name)
thanks,
Lucian
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|