nv-l
[Top] [All Lists]

Re: [nv-l] Nortel Contivity MIB

To: Jane Curry <jane.curry@skills-1st.co.uk>
Subject: Re: [nv-l] Nortel Contivity MIB
From: tivoli <tivoli@bu.brauunion.ro>
Date: Mon, 01 Sep 2003 13:00:25 +0300
Cc: NetView mailing list <nv-l@lists.tivoli.com>
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Mon, 01 Sep 2003 11:00:59 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
References: <OFCE9ECB71.D59C32F0-ON87256D91.005A861B-85256D91.005AAA87@us.ibm.com> <3F53077D.3070406@bu.brauunion.ro> <3F530919.7040506@skills-1st.co.uk>
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.2) Gecko/20030708
I am VERY sure that SNMP set works, I did half of the configurations with snmp set! anyway IBM support told me this is the normal behavior for NETMON server in Windows Netview: it doesn't do any sets to MLMs ...hmmm!!.. hard to believe

thanks
Lucian


Jane Curry wrote:

Two thoughts on this...
Are you quite sure that your SNMP community names permit writes as well as reads??? With the windows MLM, you also need to do an SNMP set to ensure that the running MLM configuration gets saved away - have you done this?

Cheers,
Jane

tivoli wrote:

hi there list!

I have this:

netview 7.1.3 on w2k and 7 MLMs on w2k
I configured mlm with snmp set and by editing config file

....................a piece of smmlmcurrent.config............................

smMlmFilterDefaultAction = 1
smMlmFilterTrapReception = 1
smMlmFilterTcpTrapReception = 1
smMlmFilterUdpTrapReceptionPort = 162
smMlmFilterTcpTrapReceptionPort = 162
smMlmAliasName[NV10.13.2.37.1] = "NV10.13.2.37.1"
smMlmAliasState = 3
smMlmAliasList = "10.13.10.1 10.13.10.100 10.13.10.101 10.13.10.108
10.13.10.124 10.13.10.132 10.13.10.146 10.13.10.15 10.13.10.150 10.13.10.151 10.13.10.156 10.13.10.16 10.13.10.19 10.13.10.2 10.13.10.20 10.13.10.21

10.13.10.23 10.13.10.30 10.13.10.31 10.13.10.33 10.13.10.34 10.13.10.35
10.13.10.36 10.13.10.37 10.13.10.38 10.13.10.40 10.13.10.50 10.13.10.54
10.13.10.72 10.13.10.76 10.13.10.85 10.13.10.86 10.13.10.87 10.13.10.88
10.13.10.90 10.13.10.96 10.13.15.1 "
smMlmTrapDestinationName[NV10.13.2.37] = "NV10.13.2.37"
smMlmTrapDestinationState = 3
smMlmTrapDestinationHost = "10.13.2.37"
smMlmTrapDestinationMask = 254
smMlmTrapDestinationActivationTime = " "
smMlmTrapDestinationActivationDayOfWeek = ""
smMlmTrapDestinationDeactivationTime = " "
smMlmTrapDestinationDeactivationDayOfWeek = ""
smMlmStatusMonitorName[NV10.13.2.37.1] = "NV10.13.2.37.1"
smMlmStatusMonitorState = 3
smMlmStatusMonitorDescription = ""
smMlmStatusMonitorAddressFamily = 2
smMlmStatusMonitorGroup = "NV10.13.2.37.1"
smMlmStatusMonitorFrequency = "300s"
smMlmStatusMonitorTimeout = "2s"
smMlmStatusMonitorMaxAttempts = 3
smMlmDiscoveryState = 2
smMlmDiscoveryBroadcastSearch = 3
smMlmDiscoveryBroadcastSearchTime = "12:15"
smMlmDiscoveryBroadcastSearchDays = "all"

............................................................................> ..........

-now, netview receive from MLMs traps about nodes status up or down
-netview doesn' t ping anymore MLM's nodes so I'm sure the MLMs are working

-I know that when netview makes a poll to a MLM it does some snmp gets and
also snmp sets (to upgrade mlm configurations )
-in my case I installed ethereal, listen the net and I don't see any snmp set! only gets from each MLM. what's wrong? the community names are good


the aliaslist never gets updated ! so, I have to do it manually??!! it's absurd!

(I manually did some sets, and I never received a trap for bad community name)


thanks,
Lucian




---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)








---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web