Hi Greg.
Thanks for your help.
The problem was a missing link of this library libcrypto.so.0.9.6, I made a
link and then the daemon started Ok.
Anabella G.
Banesco Bank.
"Gregory Crow" <crowg@magnum-tech.com> con fecha 31/08/2003 10:55:20 p.m.
Destinatarios: <Anabella_Gonzalez@banesco.com>
CC: <nv-l@lists.tivoli.com>
Asunto: RE: [nv-l] Switch Analyzer daemon error.
Couple of things to try:
1) cd /usr/OV/ITSL2/bin
./correlator
If it's a library problem, it will show up when trying to run
the component from the command line. (If so, please send error back).
2) check for any *.err files in /usr/OV/ITSL2/bin
If a component fails before it is completely initialized,
it will create a .err file instead of a .log file. (If there is any data in
them, please send back).
Greg
-----Original Message-----
From: Anabella_Gonzalez@banesco.com
[mailto:Anabella_Gonzalez@banesco.com]
Sent: Friday, August 29, 2003 3:20 PM
To: crowg@magnum-tech.com
Cc: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Switch Analyzer daemon error.
Hi Greg.
Thanks for you answer.
Right Now I don't have the CD 1.2.1, and I tried to download efix, and I
didn't find any efix.
The result from ls -l /usr/lib/*crypto* is:
-rw-r--r-- 1 root root 1475000 Sep 7 2001
/usr/lib/libcrypto.a
lrwxrwxrwx 1 root root 29 Jun 18 13:44
/usr/lib/libcrypto.so -> ../../lib/libcrypto.so.0.9.6b
Any information would be appreciated.
Thanks In Advance
Anabella Gonzalez D.
Banesco Bank.
"Gregory Crow" <crowg@magnum-tech.com> con fecha 29/08/2003 12:40:26 p.m.
Destinatarios: <Anabella_Gonzalez@banesco.com>
CC: <nv-l@lists.tivoli.com>
Asunto: RE: [nv-l] Switch Analyzer daemon error.
Anabella,
First, I'd suggest to install 1.2.1 as it's the latest + there
is an efix
for the 1.2.1 that you should load.
The problem is most likely a missing link. Check the readme for creating
the softlink that is missing for libcrypto.
If you can't find it - send us back the results from
ls -l /usr/lib/*crypto*
We can check to see if it's the link issue.
Greg
-----Original Message-----
From: Anabella_Gonzalez@banesco.com
[mailto:Anabella_Gonzalez@banesco.com]
Sent: Thursday, August 28, 2003 16:07
To: nv-l@lists.tivoli.com
Subject: [nv-l] Switch Analyzer daemon error.
Red Hat Intel 7.2
Netview 7.1.3
Framework 4.1
Switch Analyzer 1.2
We were testing Switch Analyzer on linux, the installation worked fine, but
when it finished, the daemon itsl2 was not running, I ran: ovstart itsl2
and displayed the following error: exit status: exit(127), and the daemon
it's not running.
I checked the log directory, but it's empty.
What can we do?????
Any information would be appreciated.
Thanks In Advance
Anabella Gonzalez D.
Banesco Bank.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|