Jane,
Ah - I get it - a club thing ;-) - is there a badge?
That helps a lot - at least to put what I'm reading in the right
perspective.
I've been editing the .config file on the MLM & that's been ok, but I
can see it wouldn't be fun for anything other than a lab. That said a
script with a bunch on snmpset's wouldn't be too bad I guess.
Attended MLM doesn't appeal - a nice "thin" MLM looks better since no
doubt it would be on non-dedicated hardware.
I think I'll poke around a bit more then wait patiently for 7.1.4 & see
what that brings in terms of Linux improvements. It would be great to
get Linux level with AIX et al for Netview I have to say - they've made
a good start so far...
Thanks again
K
------------------------------------------------------------------------
---
Karl Prinelle
Elyzium Ltd
Office: +44 (0)1753 515000
Mobile: +44 (0)7813 189198
E-mail: karl.prinelle@elyzium.co.uk
Website:www.elyzium.co.uk
------------------------------------------------------------------------
---
Elyzium Disclaimer:
This email transmission is confidential and intended solely for the
person
or organisation to whom it is addressed. If you are not the intended
recipient, you must not copy, distribute or disseminate the information,
or
take any action in reliance of it. Any views expressed in this message
are
those of the individual sender, except where the sender specifically
states
them to be the views of any organisation or employer.
If you have received this message in error, do not open any attachment
but please notify the sender (above) deleting this message from your
system.
Please rely on your own virus check no responsibility is taken by the
sender for any damage arising out of any bug or virus infection.
------------------------------------------------------------------------
---
-----Original Message-----
From: Jane Curry [mailto:jane.curry@skills-1st.co.uk]
Sent: 05 September 2003 19:14
To: Karl Prinelle; NetView mailing list
Subject: Re: [nv-l] mlm on nt docs
Hi Karl,
Welcome to the "we want full support for MLM from Windows and Linux"
club!
The only formal doc for MLM is the MLM manual that I don't believe has
been updated for many years and says virtually nothing about MLM on
Windows (though generally the MLM functionality on Windows and Unix is
very similar - the readme with the Windows MLM gives a section on
differences and I believe discovery algorithms is one of those).
The big difference is how you manage an MLM from NetView, and NetView on
Windows or Linux is not a good answer! The good news is that, provided
you have the MLM SNMP agent setup to permit read/write access from a
NetView (any NetView - in fact anything that can send SNMP SETs), you
can configure the MLM with SNMP SETs. It's a bit like doing assembler
programming, but it is possible.
Your other option, if you have coommand line access to your MLM, is to
manually edit the MLM config file and bounce the MLM - also not nice but
we are probably up to "programming in Algol" level.
You should certainly be able to get a Windows MLM to do data collecting
and thresholding - I've got one (albeit configured with the APM facility
of NV on AIX) - that's the main MLM table I tend to use.
I'm pretty certain the last MLM drop was with NV 7.1.3 - certainly there
weas no MLM with NV 7.1.3 FP1.
I don't think a W2K NetView would buy you anything by way of
functionality to help with MLM - same issues as Linux - no smconfig and
no APM.
There is the concept of an attended MLM which is NV for Windows and MLM
on the same box. The idea is that you have a local NetView that users
can run up the GUI on and that NetView also forwards stuff to a higher
level NetView. I certainly don't know many people using this.....
IBM / Tivoli - we seem to have had a bit of a run recently on bringing
the NV on Linux up to the full NV on Unix spec...........!!!!!!!!!
Cheers,
Jane
Karl Prinelle wrote:
> Hi list,
>
> I'm having a poke around with MLM's in a lab & need a few pointers -
> alternatively it could just be Friday brain fade...
>
> Environment: My lab has a Linux Netview 7.1.3+fp1 and w2k MLM.
> Netview reports that the MLM is up so I've obviously done something
> right (!)
>
> Questions:
> 1. Can anyone point me to any docs on mlm for NT? I'm using the MLM
> Users guide, but it only mentions installing it & using a supported
> unix to manage it through smconfig. When I browsed the MLM mib
> initially I noticed comments about "Netview for NT not installed,
> discovery and thresholding not available" which doesn't sound great.
> From the docs it seems I can delegate all this stuff?
>
> 2. I know there is no MLM support for Linux, but I'm not clear about
> the detail of that statement. Does this mean I can't use snmpset
> (since there is no smconfig) from a Linux netview to configure an NT
> MLM & have that NT MLM take on management functions in the same way it
> would if I had an AIX Netview? If I can't then that would make my lab
> a well flogged dead horse ;-)
>
> 3. I've noticed comments in the MLM mib tables about discovery sensor
> is not supported on NT, but any kind of restricted functionality
> doesn't seem to be mentioned in the docs - have I been reading with my
> eyes closed again or are there restrictions?
>
> 4. Is there a fp1 for the mlm? Maybe a magic switch on the fp1
> installer to extract that bit??
>
> 5. Would I get more out of my NT MLM if I had a full w2k Netview on
> the MLM machine - sounds a little odd to me but nonetheless possible..
>
> Any help appreciated....
>
> K
>
>
>
> ----------------------------------------------------------------------
> -----
> Karl Prinelle
> Elyzium Ltd
> Office: +44 (0)1753 515000
> Mobile: +44 (0)7813 189198
>
> E-mail: karl.prinelle@elyzium.co.uk
> <mailto:karl.prinelle@elyzium.co.uk>
>
> Website:www.elyzium.co.uk
>
> ----------------------------------------------------------------------
> -----
> Elyzium Disclaimer:
> This email transmission is confidential and intended solely for the
> person
> or organisation to whom it is addressed. If you are not the intended
> recipient, you must not copy, distribute or disseminate the
> information, or
> take any action in reliance of it. Any views expressed in this message
> are
> those of the individual sender, except where the sender specifically
> states
> them to be the views of any organisation or employer.
> If you have received this message in error, do not open any attachment
> but please notify the sender (above) deleting this message from your
> system.
> Please rely on your own virus check no responsibility is taken by the
> sender for any damage arising out of any bug or virus infection.
>
------------------------------------------------------------------------
---
>
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group help
line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|