RE: [nv-l] name generation

["Colin Mulkerrins" <Colin.Mulkerrins@anpost.ie>]

Laszlo,

 

Did you set Should IP Map override user symbol customisation? to False and then re-label the symbols?

 

Regards

Colin Mulkerrins
Enterprise Systems Management
An Post

 

-----Original Message-----
From: Pal, Laszlo [mailto:laszlo.pal@eds.com]
Sent: 29 October 2003 10:04
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] name generation

What I would like to see is either the dns name or the description (free text I entered) for the interfaces. IP address, physical address and interface name does not help our monitoring center to easily identify the problem.

 

My another issue regarding to the name generation is the name of the LAN segments. Netview generates names for these objects very similar to the interfaces. What I can see right now is dns name for the routers (it is good), ip addresses for the connecting lan segments and ip addresses for the interfaces. I tried to rename these symbols to a more descriptive name but within a day netmon changed back the names to the stupid IP address form.

 

Laszlo

 

 

-----Original Message-----
From: Leslie Clark [mailto:lclark@us.ibm.com]
Sent: Tuesday, October 28, 2003 7:51 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] name generation

 

Choose Default, and it will get you the descriptive label, like FastEthernet1/0. Is that what you wanted, or is it the lack of DNS name on interfaces that bothers you?

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit

"Pal, Laszlo" <laszlo.pal@eds.com> Sent by: owner-nv-l-digest@lists.us.ibm.com 10/28/2003 06:50 AM Please respond to nv-l

To:        nv-l@lists.us.ibm.com         cc:                 Subject:        RE: [nv-l] name generation

description, such as Serial0/0/1 if you want. To do that, go to Edit..Modify/Describe..Map and pick the ipmap application. One of the options in there is for changing the labels on interfaces. Change it, ok, ok and they all change. This is an all-or-nothing choice for the whole map.

Those are your choices. You cannot get it to label the interface cards with the DNS name for each address.

I checked this option and only choices I have is IP address, Physical address, Unset, Default. None of them looks useable L I think design part of netview project always gets a very low priority
 
Laszlo
 

***********************************************************************************
This e-mail and its attachments, is confidential and is intended for the addressee(s) only. If you are not the intended recipient, disclosure, distribution or any action taken in reliance on it is prohibited and may be unlawful. Please note that any information expressed in this message or its attachments is not given or endorsed by An Post unless otherwise indicated by an authorised representative independently of this message. An Post does not accept responsibility for the contents of this message and although it has been scanned for viruses An Post will not accept responsibility for any damage caused as a result of a virus being passed on.
***********************************************************************************