nv-l
[Top] [All Lists]

RE: [nv-l] nvmaputil.sh command not working?

To: "'nv-l@lists.us.ibm.com'" <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] nvmaputil.sh command not working?
From: "Hill, Channing" <CHill@bbandt.com>
Date: Mon, 3 Nov 2003 13:09:45 -0500
Delivery-date: Mon, 03 Nov 2003 18:23:31 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l-digest@lists.us.ibm.com
I'm sure all you need is a R/W map opened OR netviewd running in R/W mode. I
successfully performed nvmaputil.sh commands in a test environment without
the netviewd running....just the native R/W map. I'll probably open up a
case with support unless anybody has anything to add. I assume its either
something with my environment or Java.

Channing Hill
EMS Analyst II
BB&T
(252) 246-3642


-----Original Message-----
From: Paul Stroud [mailto:pstroud@bellsouth.net] 
Sent: Monday, November 03, 2003 12:14 PM
To: nv-l@lists.us.ibm.com; Hill, Channing; 'nv-l@lists.us.ibm.com'
Subject: Re: [nv-l] nvmaputil.sh command not working?


If I am not mistaken, the interface that allows for this is the web client.
You must have netviewd up and running in read-write mode for it to work. I
may be incorrect and if I am, someone please let me know. If this is 
the case, and doing it without netviewd running, does not produce an error,
you should open a case with support.

Paul



On Monday 03 November 2003 11:57, Hill, Channing wrote:
> Netview 7.1.3 w/ Fixpack 1 on AIX 5.1
>
> I've recently overhauled our production Netview system...OS installed 
> from scratch and Netview 7.1.3 installed via migration method ( 
> databases, conf files, etc. were pulled from a properly working "test" 
> system. Everything appears to be working as designed....just like I 
> had tested except that I can't get "nvmaputil.sh" to do anything. It 
> runs and completes with no errors but has no effect on the symbols or 
> objects it is ran on.
>
> Everything is in place for it to work.....I have one native R/W map
> (default) opened, the "NVenvironment" script was ran from .profile at 
> login, and I am using the right symbol ID's (taken from ovmapdump) and 
> or selection names in the command.
>
> Anybody got any ideas as to what's missing or why its not working??
>
> Channing Hill
> EMS Analyst II
> BB&T
> (252) 246-3642

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web