nv-l
[Top] [All Lists]

Re: [nv-l] How to make appear in IP map something in the object datbase?

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] How to make appear in IP map something in the object datbase?
From: igastelu@unm.edu
Date: Tue, 18 Nov 2003 09:27:50 -0700
Delivery-date: Tue, 18 Nov 2003 16:35:59 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OF6F4EFAA2.7FBFD40B-ON85256DDF.0016ADE5-85256DDF.001734E1@us.ibm.com>
References: <OF6F4EFAA2.7FBFD40B-ON85256DDF.0016ADE5-85256DDF.001734E1@us.ibm.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
When using the command "ovmapcount" the output does not contain many of 
the host that appaer with all their fields in the output 
of "ovobjprint".

I just have one map, the default.

I used "ovtopofix"(I had to stop netmon before) the output was 
just "done".

No where in my map I see those host that I see in the object database
(ovobjprint).

All the daemons are running with the only exception of tecad_nv6k.

Thanks for your help
Inaki



Quoting Leslie Clark <lclark@us.ibm.com>:

> When you display the object info, there are two fields to look for:
> 'maps 
> exists' and 'maps managed'. Check those numbers. If it says that the
> 
> object exists in a map, then you must not be searching for it
> correctly. 
> Try 'Locate..Object...by Attribute', scroll through the list until
> you 
> find 'IP Address', and enter the address you are expecting, chose
> 'Exact 
> match'. That should take you to the object. If you have more than one
> map 
> (the default map is called 'default') then check both maps. Things
> deleted 
> from one map cannot be rediscovered until they are deleted from all
> maps.
> 
> If the fields do not exist, then the object has not yet been placed
> on the 
> map. Time for housekeeping. Use ovmapcount and ovtopofix (see the man
> 
> pages) and close and open the map. Do the search again. 
> 
> Cordially,
> 
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
> 
> 
> 
> 
> 
> igastelu@unm.edu
> Sent by: owner-nv-l@lists.us.ibm.com
> 11/14/2003 07:15 PM
> Please respond to nv-l
> 
>  
>         To:     nv-l@lists.us.ibm.com
>         cc: 
>         Subject:        [nv-l] How to make appear in IP map something
> in the object datbase?
> 
> 
> 
>   Hi guys, maybe somebody already have ask this but I have not seen 
> it..
>   How can I make appear something that is in the object database(seen
> 
> when "ovobjprint") in the IP Map?  I have many things in the datanase
> 
> but I am not capable to see it.
>   I tried to create an smartset with only this host but it says that
> 
> it could not find the matching IP address.
>   Then I tried the loadhost command but it says host in already on 
> database, so I gues is simply a problem of learning to disply this 
> object, but I do not know how...
> 
>   I have NV 7.1.3 running on W2000 over Framework 4.1 and using 
> Microsoft SQL server 2000.
> 
> Any help is very appreciated.
> 
> Inaki
> 
> 
> 

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web