RE: [nv-l] Mib are unable to load

[Mohammed Quayum <MQUAYUM@dm.gov.ae>]

The devices for which we want the mibs to be installed are Laser device (from lightpoint), Peribit (for data compression) and Cisco Wireless Access points.

 

These devices are sending the traps but cannot be understand by the Netview. These traps are important for us to know the compression rate, availability (though can be known by polling),

Unuthorized access, and many more. 

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of James Shanks
Sent: Monday, December 29, 2003 7:38 AM
To: nv-l@lists.tivoli.com
Subject: Re: [nv-l] Mib are unable to load

Your problems is that this is an SNMP Version 2 MIB -- Module Identity is an SNMP V2-only construct -- but you are using an SNMP V1-only loader. You can use either the Java MIB loader in the web client or loadmibv2, the stand-alone V2/V1 loader in NetView for Windows. Or you can contact the vendor and ask them for an SNMP V1 version of the MIB. The latter would be a better alternative, depending on what you hope to accomplish by loading the MIB.

So the question becomes, "Why are you loading this MIB?" What are you hoping to do with it once it is loaded?


James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
nraaman@chennai.tcs.co.in

nraaman@chennai.tcs.co.in 12/26/03 05:21 PM

To: nv-l@lists.us.ibm.com, James Shanks/Raleigh/IBM@IBMUS cc: Subject: Re: [nv-l] Mib are unable to load

Hi,

I captured the snapshot of the error that accoured and attached with this mail.

(See attached file: Doc1.doc)

I have loaded on NetView on Windows platform. On GUI " MIB Loader SNMP V1 (2)". Please
help me to solve this.


Thanks & Regards
N.Raaman(Ramamoorthy)




                     James Shanks
                     <jshanks@us.ibm.c        To:       nv-l@lists.us.ibm.com
                     om>                      cc:
                     Sent by:                 Subject:  Re: [nv-l] Mib are unable to load
                     owner-nv-l@lists.
                     us.ibm.com


                     12/24/2003 04:24
                     PM
                     Please respond to
                     nv-l








Unless you'd prefer to call IBM Support and get personal help, I suggest you tell us just
what errors you got so that someone might make a guess as to what might be wrong.

What loader command did you use and what error messages did you see?

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Inactive hide details for nraaman@chennai.tcs.co.innraaman@chennai.tcs.co.in



 [IMAG   [IMAGE]                  [IMAGE]
 E]
         nraaman@chennai.          To:   nv-l@lists.us.ibm.com
         tcs.co.in                 cc:
         Sent by:                  Subject:    [nv-l] Mib are unable to load
         owner-nv-l@lists
         .us.ibm.com

         12/23/03 09:15
         PM
         Please respond
         to nv-l






Hi,

I am unable to load QOS mibs on NetView 7.1.4 on unix.

Regards
N.Raaman






#### InterScan_Disclaimer.txt has been removed from this note on December 24, 2003 by
James Shanks (Embedded image moved to file: pic07376.pcx)(Embedded image moved to file:
pic13931.pcx)(Embedded image moved to file: pic26308.pcx)
(See attached file: InterScan_SafeStamp.txt)











#### Doc1.doc has been removed from this note on December 28, 2003 by James Shanks
#### pic07376.pcx has been removed from this note on December 28, 2003 by James Shanks
#### pic13931.pcx has been removed from this note on December 28, 2003 by James Shanks
#### pic26308.pcx has been removed from this note on December 28, 2003 by James Shanks
#### InterScan_SafeStamp.txt has been removed from this note on December 28, 2003 by James Shanks
#### mime001.txt has been removed from this note on December 28, 2003 by James Shanks
#### InterScan_Disclaimer.txt has been removed from this note on December 28, 2003 by James Shanks