RE: [nv-l] Object in DB but not on map

["Erdey, Raymond M" <Raymond.M.Erdey@erac.com>]

What happens if you search for the object by the "IP Address" "Attribute..".

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of DSullinger@dot.state.az.us
Sent: Thursday, January 15, 2004 1:41 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Object in DB but not on map

I'm ahead of you... did that and it still isn't there, yet I can ping the device and do a nmdemandpoll to it.

 

---

From: Erdey, Raymond M [mailto:Raymond.M.Erdey@erac.com]
Sent: Thursday, January 15, 2004 12:23 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Object in DB but not on map

Bounce netmon and search for it after netmon restarts.

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of DSullinger@dot.state.az.us
Sent: Thursday, January 15, 2004 12:44 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Object in DB but not on map

We did and it said that no devices were found in the map.

 

---

From: Erdey, Raymond M [mailto:Raymond.M.Erdey@erac.com]
Sent: Thursday, January 15, 2004 11:31 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Object in DB but not on map

Use the "Locate" menu option and see if you can find the device that way on the Read/Write map... It may have been placed automatically in a network segment on your map...

Raymond Erdey
Enterprise Rent-A-Car
System Administrator
Network Management System Administration
Email: raymond.m.erdey@erac.com
Web: http://www.geocities.com/rerdey/

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On Behalf Of DSullinger@dot.state.az.us
Sent: Thursday, January 15, 2004 11:20 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Object in DB but not on map

We deleted an ATM router from our all submaps and waited for it to rediscover the device an place it in the holding area.  We waited a good hour and it still didn't show up.  I did a nmdemandpoll on both the hub router connected to the ATM circuit and the ATM router itself.  Demand poll did poll the device, but it still never showed up on the map.  Do I need to do a ovtopofix -u to get it to show up?

 

Thanks