Re: [nv-l] Cisco-products.mib

[James Shanks <jshanks@us.ibm.com>]

I didn't count 'em all but in xnmbrowser2,
I have a list under  enterprises -> cisco -> ciscoProducts,
which starts with ciscoGatewayServer (.1.3.6.1.4.1.9.1.1)
and ends with cisco7140Dualmm3 (.1.3.6.1.4.1.9.1.269)

 CISCO-SMI-V1SMI.my and  CISCO-PRODUCTS-MIB-V1SMI.my
 are the only two Cisco MIBs I have loaded.


James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group

"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/17/2004 04:06 PM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] Cisco-products.mib

when you say works for you James,   if you pull up the mib browser
in netview and select private enterprise cisco ciscoProducts does it list
out all the products that are defined under the ciscoProducts mib file?
 I have loaded (via xnmloadmib2 the smi and the ciscoProducts mibs)
but still do nto see them in the mib browser

James Shanks <jshanks@us.ibm.com> Sent by: owner-nv-l@lists.us.ibm.com 03/17/2004 03:47 PM Please respond to nv-l

To:        nv-l@lists.us.ibm.com        cc:                Subject:        Re: [nv-l] Cisco-products.mib

Works for me using xnmloadmib2.  But I had to load  CISCO-SMI-V1SMI.my
first to define ciscoProducts (.1.3.6.1.4.1.9.1).
Note that Cisco had an much earlier version of their base MIB, which I
think we still ship as "cisco", in which that OID was labeled
just "products".  If you have that loaded, I would unload
it and load the current CISCO-SMI-V1SMI.my.

Generally speaking, the ".my" suffix indicates an SNMP V2 MIB,
so to load it in the V1 loader, xnmloadmib, you'd need a V1 copy from their
website.  Those are generally labelled ".mib".    Try
ftp://ftp.cisco.com/pub/mibs/   if you don't have copies



James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group

"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/17/2004 01:49 PM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	[nv-l] Cisco-products.mib

Question:   when loading the Cisco-Products.mib (either version V2
or V1) when it commits (loading it via web console mib loader).  
 Bring up the snmp mib browser v1 and under 
private > enterprise > cisco > ciscoProducts > there is only
about 6 entries. When in the actual mib itself it lists about 200 different
entries. 

-Chris Petrina