nv-l
[Top] [All Lists]

Re: [nv-l] Cisco-products.mib

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Cisco-products.mib
From: Jeff Fitzwater <jfitz@princeton.edu>
Date: Wed, 17 Mar 2004 17:00:42 -0500
Delivery-date: Wed, 17 Mar 2004 22:23:22 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Organization: OIT Systems & Networking
References: <OFE56B8E24.0157D020-ON87256E5A.00749A3D-85256E5A.00764464@us.ibm.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
James Shanks wrote:
 
I didn't count 'em all but in xnmbrowser2, I have a list under  enterprises -> cisco -> ciscoProducts, which starts with ciscoGatewayServer (.1.3.6.1.4.1.9.1.1)
and ends with cisco7140Dualmm3 (.1.3.6.1.4.1.9.1.269)

 CISCO-SMI-V1SMI.my and  CISCO-PRODUCTS-MIB-V1SMI.my  are the only two Cisco MIBs I have loaded.
 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
 
 
"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/17/2004 04:06 PM
Please respond to
nv-l

To
nv-l@lists.us.ibm.com
cc
Subject
Re: [nv-l] Cisco-products.mib

 
 

when you say works for you James,   if you pull up the mib browser in netview and select private enterprise cisco ciscoProducts does it list out all the products that are defined under the ciscoProducts mib file?  I have loaded (via xnmloadmib2 the smi and the ciscoProducts mibs) but still do nto see them in the mib browser
 
James Shanks <jshanks@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/17/2004 03:47 PM
Please respond to nv-l


       To:        nv-l@lists.us.ibm.com
       cc: 
       Subject:        Re: [nv-l] Cisco-products.mib

 
 
 

Works for me using xnmloadmib2.  But I had to load  CISCO-SMI-V1SMI.my first to define ciscoProducts (.1.3.6.1.4.1.9.1).
Note that Cisco had an much earlier version of their base MIB, which I think we still ship as "cisco", in which that OID was labeled just "products".  If you have that loaded, I would unload it and load the current CISCO-SMI-V1SMI.my.

Generally speaking, the ".my" suffix indicates an SNMP V2 MIB, so to load it in the V1 loader, xnmloadmib, you'd need a V1 copy from their website.  Those are generally labelled ".mib".    Try ftp://ftp.cisco.com/pub/mibs/   if you don't have copies
 
 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"Christopher J Petrina" <cjp8@meadwestvaco.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/17/2004 01:49 PM
Please respond to
nv-l

To nv-l@lists.us.ibm.com
cc
Subject [nv-l] Cisco-products.mib

 
 

 
 
 
 

Question:   when loading the Cisco-Products.mib (either version V2 or V1) when it commits (loading it via web console mib loader).    Bring up the snmp mib browser v1 and under
private > enterprise > cisco > ciscoProducts > there is only about 6 entries. When in the actual mib itself it lists about 200 different entries.

-Chris Petrina
 

Sounds like you are running XNMBROWSER NOT XNMBROWSER2.
 

Jeff Fitzwater
OIT Network Systems
Princeton University

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web