Meyos,
Can I just check you have the correct syntax here - you need to redirect
the output from the mapdump command so you should have:
ovmapdump -v > ovmapdump.out
The ">" is the redirection operator.
Cheers,
Jane
Meyos Yemveng wrote:
Certain I used ovmapdump -v ovmapdump.out
what OS and perl version are you having succes with?
*/Paul <pstroud@bellsouth.net>/* wrote:
Are you sure you used ovmapdump and not ovtopodump?
You must use the mapdump for it work properly. Take a
look at your output from ovmapdump and make sure it is
readable.
Paul
Meyos Yemveng wrote:
> I am having the same problem with the same version ....
> Running on:
> 1- Solaris 9 , Perl 5.6.1
> 2- Solaris 8, Perl 5.005_03
>
> It only prints the following:
> # location.conf file was autogenerated on Friday May 21 17:48:01
GMT 2004.
> # Script completed processing on Friday May 21 17:48:05 GMT 2004
>
>
> */Paul /* wrote:
>
> Scott,
> Can you give a better description? What exactly is your problem.
> I have used the script a number of times with no problems on
> different versions of perl across several platforms. What are
&! gt; you running into thats causing a problem?
>
> Paul
>
>
>
> Bursik, Scott {PBSG} wrote:
>
> > Actually the version I downloaded from
> >
> > http://www.nv-l.org/twiki/bin/view/Netview/LocationConf
> >
> > was the version with the function and I have the problem.
> >
> >
> >
> >
> >
> > Scott Bursik
> >
> > Enterprise Systems Management
> >
> > PepsiCo Business Solutions Group
> >
> > (972) 963-1400
> >
> > scott.bursik@pbsg.com
> >
> >
>
------------------------------------------------------------------------
> >
> > *From:* Barr, Scott [mailto:Scott_Barr@csgsystems.com]
> > *Sent:* Friday, May 21, 2004 3:55 PM
> > *To:* nv-l@lists.us.ibm.com
> > *Subject:* RE: [nv-l] build_location.pl
> >
! > >
> >
> > The new version I have not yet posted uses that function. I
> > just haven't had a time to post it to the NetView web home. Good
> catch
> > Ray - thanks.
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > *From:* owner-nv-l@lists.us.ibm.com
> > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of
> > *ray.smith@clorox.com
> > *Sent:* Friday, May 21, 2004 3:46 PM
> > *To:* nv-l@lists.us.ibm.com
> > *Subject:* RE: [nv-l] build_location.pl
> >
> >
> > The problem of empty output is caused by the readline function, a
> > seldom used Perl function that apparently behaves differently in
> > different versions of Perl. If you replace all instances of
> > "rea! dline ($_[0])" with "", the script should work fine
> > ! in any version (or at least version 4 or better, which is
all I've
> > ever worked with) of Perl.
> >
> >
> > Ray Smith
> > IS Engineer
> > The Clorox Services Company
> > 925-425-4363
> >
> >
> >
> >
> >
> > *"Bursik, Scott {PBSG}" *
> > Sent by: owner-nv-l@lists.us.ibm.com
> >
> > 05/21/2004 01:02 PM
> > Please respond to nv-l
> >
> >
> >
> >
> > To: "'nv-l@lists.us.ibm.com'"
> > cc:
> > Subject: RE: [nv-l] build_location.pl
> >
> >
> >
> >
> > Just for the record, I had the same problem and my perl is at 5.6
> > on AIX 4.3.3.
> >
> >
> > Scott Bursik
> > Enterprise Systems Management
> > PepsiCo Business Solutions Group
> >
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> >
> > *From:* Barr, Scott [mailto:Scott_Barr@csgsystems.com] *
> > Sent:* Friday, May 21, 2004 2:46 PM*
> > To:* nv-l@lists.us.ibm.com*
> > Subject:* RE: [nv-l] build_location.pl
> >
> > I think 5.6 should work. I am on solaris 2.8 and had the issue
> > with PERL 5.05. Let me research a bit and I'll post a response
here.
> >
> >
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> >
> > *From:* owner-nv-l@lists.us.ibm.com
> > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Meyos Yemveng*
> > Sent:* Friday, May 21, 2004 2:28 PM*
> > To:* nv-l@lists.us.ibm.com*
> > Subject:* RE: [nv-l] build_location.pl
> > I am runn! ing perl v5.6.1 on Solaris 9 ...
> > Q: what version is recommended?
> >
> >
> > */
> > "Barr, Scott" /* wrote:
> > Your PERL version may be a factor. Can you check what version you
> > are using?
> >
> > perl -version will tell you
> >
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> >
> > *From:* owner-nv-l@lists.us.ibm.com
> > [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Meyos Yemveng*
> > Sent:* Friday, May 21, 2004 1:20 PM*
> > To:* netview Tivoli*
> > Subject:* [nv-l] build_location.pl
> > Hi Folks,
> > I downloaded the build_location.pl script
> > I then ran:
> > ovmapdump -v > /tmp/ovmapdump.out
> > build_location.pl /tmp/ovmapdump.out > /tmp/location.conf
> >
> &g! t; my ovmapcount.out is about 7026770 bytes
> > my location.conf file generated is 141 bytes with only the
> > following lines:
> >
> > # location.conf file was autogenerated on Friday May 21 17:48:01
> > GMT 2004.
> > # Script completed processing on Friday May 21 17:48:05 GMT 2004
> >
> > Q1: Any idea on what I did wrong?
> > Q2: Any suggestions?
> >
> >
> >
> > Thank You,
> > Meyos
> > "ALLEZ LES LIONS INDOMPTABLES"
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> >
> > Post your free ad now! *Yahoo! Canada Personals*
> >
> >
> >
> > Thank You,
> > Meyos
> > "ALLEZ LES LIONS INDOMPTABLES"
> >
> >
> >
> >
>
------------------------------------------------------------------------
> >
> >
> > Post your free ad now! *Yahoo! Canada Personals*
> >
> >
>
>
>
> Thank You,
> Meyos
> "ALLEZ LES LIONS INDOMPTABLES"
>
>
>
------------------------------------------------------------------------
> Post your free ad now! *Yahoo! Canada Personals*
>
Thank You,
Meyos
"ALLEZ LES LIONS INDOMPTABLES"
------------------------------------------------------------------------
Post your free ad now! *Yahoo! Canada Personals*
<http://ca.personals.yahoo.com/>
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2004 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
|