Hello James,
We are not seeing any event neither in trapd.log nor in trapd.trace. I have
already enabled -x option ( it says.. UDP socket is already in use.)
Through -T option, toggling has been enabled and there is no event/message in
trapd.trace file.
The snmp trap from the DirectWay NMS (ip address 192.168.10.180) is coming on
our NetView server (ip address 10.72.15.196) on 162 port that we have seen
using sniffer. Also, there is no firewall in between.
Can you suggest, what all are required to be configured at NetView level to get
the snmp trapds? Is any particular mibs to be loaded?
Regards,
Anupam
-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Monday, July 19, 2004 5:27 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
If you are not seeing traps, in the trapd.log, nor any messages about invalid
traps, then your DircetWay box is not sending them, period.
There is no way that trapd can get a trap and not log it or issue an error
message.
You can get him to trace everything that he sees by first configuring trapd to
run with the -x option, (hex dump all packets), using serversetup, and then
toggling the trace off and on with "trapd -T" from the command line. But to
really prove that nothing is coming in on port 162 udp, you will need to get an
iptrace.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"anand anupam" <ananda@bharatpetroleum.com>
Sent by: owner-nv-l@lists.us.ibm.com
07/19/2004 05:35 AM
Please respond to
nv-l
To
<nv-l@lists.tivoli.com>
cc
Subject
[nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
Hello Everybody,
We are having Tivoli NetView(7.1.3) on AIX 4.3.3.
Recently we installed HECL DirecWAY to monitor our VSATs (DPUs). These
VSATs(DPUs) are SNMP compliant but can not by pass HECL DirecWAY NMS. This
NMS(DirecWAY ) has been installed on HP platform and is collected information
about the status of VSATs(DPU).
Now, we wanted to integrate DirecWAY with our Tivoli NetView.
This NMs(DirecWAY) is also configured to send traps to NetView server. But we
are not getting these traps in trapd.log.
Ideally, we wanted these traps on TEC so that we can execute some TEC rules as
per our requirement.
Any idea how to achieve this?
Regards,
Anupam
|