nv-l
[Top] [All Lists]

RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview

To: <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
From: "anand anupam" <ananda@bharatpetroleum.com>
Date: Tue, 20 Jul 2004 15:45:21 +0530
Delivery-date: Tue, 20 Jul 2004 12:17:23 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Thread-index: AcRuPCInhsE2CbkFQjy6Mh1zJ7mDFQABRyLw
Thread-topic: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
Hello James,
 
I have just noticed that some traps are comming as follows:-
 
1090124266 3  Sun Jul 20 10:47:46 2004 0.0.0.0                   ? Trap found with no known format in trapd.conf(4)
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  EnterpriseENTERPRISES (1.3.6.1.4.1.303.3.3.19.8.2) community public
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  generic trap:6 specific trap:4
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  Timestamp:0 Agentaddr:0.0.0.0 args(3):
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  [1] multimedia.nmsTraps.nmsTrapVars.nmsTrapVsatName(OctetString): BPST0292
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  [2] prod.multimedia.nmsTraps.nmsTrapVars.nmsTrapNmd (OctetString): default1090124266 3  Sun Jul 18 10:47:46 2004  0.0.0.0                   ?  [3] prod.mu ltimedia.nmsTraps.nmsTrapVars.nmsTrapVsatIp (OctetString): 10.1.1.86
 
Probably these are the traps from DirectWays nms.
 
How I should configure trapd.conf for the required format/definition?
 
Regards,
Anupam
 
 -----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Tuesday, July 20, 2004 2:53 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview

I just noticed that you said "UDP socket in use". Yikes!! That means that trapd does not own the port he's configured to use, by default 162/udp. So he's not getting any external traps. What else did you put on this box which is getting them, because something else has the port, and trapd is not configured to get anything from that agent.

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Inactive hide details for "anand anupam" <ananda@bharatpetroleum.com>"anand anupam" <ananda@bharatpetroleum.com>


          "anand anupam" <ananda@bharatpetroleum.com>
          Sent by: owner-nv-l@lists.us.ibm.com

          07/20/04 02:00 AM
          Please respond to
          nv-l


To

<nv-l@lists.us.ibm.com>

cc






Subject

RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview

Hello James,

We are not seeing any event neither in trapd.log nor in trapd.trace. I have already enabled -x option ( it says.. UDP socket is already in use.)

Through -T option, toggling has been enabled and there is no event/message in trapd.trace file.

The snmp trap from the DirectWay NMS (ip address 192.168.10.180) is coming on our NetView server (ip address 10.72.15.196) on 162 port that we have seen using sniffer. Also, there is no firewall in between.

Can you suggest, what all are required to be configured at NetView level to get the snmp trapds? Is any particular mibs to be loaded?

Regards,
Anupam



-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Monday, July 19, 2004 5:27 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview




If you are not seeing traps, in the trapd.log, nor any messages about invalid traps, then your DircetWay box is not sending them, period.
There is no way that trapd can get a trap and not log it or issue an error message.

You can get him to trace everything that he sees by first configuring trapd to run with the -x option, (hex dump all packets), using serversetup, and then toggling the trace off and on with "trapd -T" from the command line. But to really prove that nothing is coming in on port 162 udp, you will need to get an iptrace.

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group



"anand anupam" <ananda@bharatpetroleum.com>
Sent by: owner-nv-l@lists.us.ibm.com



07/19/2004 05:35 AM


Please respond to
nv-l



To
<nv-l@lists.tivoli.com>

cc

Subject
[nv-l] Iintegration of HECL DirecWAY with Tivoli Netview






Hello Everybody,

We are having Tivoli NetView(7.1.3) on AIX 4.3.3.

Recently we installed HECL DirecWAY to monitor our VSATs (DPUs). These VSATs(DPUs) are SNMP compliant but can not by pass HECL DirecWAY NMS. This NMS(DirecWAY ) has been installed on HP platform and is collected information about the status of VSATs(DPU).

Now, we wanted to integrate DirecWAY with our Tivoli NetView.

This NMs(DirecWAY) is also configured to send traps to NetView server. But we are not getting these traps in trapd.log.

Ideally, we wanted these traps on TEC so that we can execute some TEC rules as per our requirement.

Any idea how to achieve this?

Regards,
Anupam








<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web