[nv-l] Traps not converting to variables

["Christopher J Petrina" <cjp8@meadwestvaco.com>]

greetings all.  

A question.  I have loaded a snmpV1
mib into netview and ran the mib2trap against it.  Everything loads
fine and all the traps are created and inserted into the trapd.conf.

The issue comes that when the trap occurs
it does not convert from the raw values (integers) to the variables defined
for those integers in the actual mib file.  (Object-type)

I have this with basically all traps.
 None of the traps coming in are converting from the raw integer value
to the textual variable of that integer.

Has anyone seen this before?  

-Chris Petrina

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________

This electronic message contains information from MeadWestvaco
Corporation or subsidiary companies, which may be confidential,
privileged or otherwise protected from disclosure.  The
information is intended to be used solely by the recipient(s)
named.  If you are not an intended recipient, be aware that
any review, disclosure, copying, distribution or use of this
transmission or its contents is prohibited.  If you have
received this transmission in error, please notify MeadWestvaco
immediately at postmaster@MeadWestvaco.com.
_______________________________________________________________________