Re: [nv-l] Object Turn Red after Ping

[free lancer <larrytechie@yahoo.com>]

Mark,

I checked snmpwalk on interface as well as ip.. and they seem very fine.. This is a router basically going up and down..now may be as you said i need to check the snmp version on other end if it's faulty..

thanks,

Larry

Mark Sklenarik <marksk@us.ibm.com> wrote:

Hi Larry,
What you are describing sound like a something we have experienced with fault snmp agent,  SNMPv3 agents or Red Hat 3.0  snmp agents.
This may occur when NetView is configured to perform status checking using SNMP, but the snmp agent is not responding even thought you can ping the NIC.  Also, check to make sure you can snmpwalk both the "ip" and "interface" MIB tables on the agent.  
NetView 7.1.3 FP3 works best went communicating with a SNMPv1 agent.  
In the case of Red Hat 3.0 we found that the agent (net-snmp) had a problem with indexing between the "interface" and "ip" index and address tables. We found that we had to update Red Hat 3.0 net-snmp c! ode to "net-snmp-5.0.9-2-30E.6" to resolve problem.

Mark F Sklenarik  IBM SWG Tivoli Solutions  Quality Assurance   Business Impact Management and Event Correlation  Software Quality Engineer  IBM Corporation

free lancer <larrytechie@yahoo.com>
Sent by: owner-nv-l@lists.us.ibm.com

11/05/2004 02:12 PM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	[nv-l] Object Turn Red after Ping

Hi,
We have Netview 7.1.3 FP3 on AIX 5.1. There is some strange behavior on some of the deivces on the Map. There are showing up as red on map. When i ping them, they come back up as green and status is up and right after some time they go red again. But there is no problem of events coming in from those devices. I'm cluless in here. Could some out there help me please.
Many Thanks,
Larry.
 

---

Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com

---

Do you Yahoo!?
 
Check out the new Yahoo! Front Page.  www.yahoo.com