nv-l
[Top] [All Lists]

RE: [nv-l] NVTECIA -STOP

To: <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] NVTECIA -STOP
From: "Delaire, Patrick" <delairep@aetna.com>
Date: Tue, 15 Mar 2005 08:53:25 -0500
Delivery-date: Tue, 15 Mar 2005 13:54:13 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Thread-index: AcUo9LZKWQDaFq5yQzGaXhk2y29tlgAcUM7Q
Thread-topic: [nv-l] NVTECIA -STOP
Gareth,
              Answers to your questions:
* This was not a problem prior to 7.1.4.2
* The server is currently setup to run non-TME
* nvevents and tecint.conf are using different rulesets.
 
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Gareth Holl
Sent: Monday, March 14, 2005 7:19 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] NVTECIA -STOP


Check your system sockets using (netstat -an and lsof) to see if nvcorrd, or nvserverd, or the nvevents process have full socket queues. Sounds like your NetView Events window (nvevents) may have lost contact with nvserverd or become hung (full sockets might indicate this).

Do you see this problem everytime you issue "nvtecia -stop" ? Did you see this problem prior to 7.1.4.2 ?

If would have nothing to do with TME verse non-TME but out of curiousity, which are you using ? Also, is your nvevents window and your tecint.conf configured to use the same ruleset ?




Gareth Holl
Staff Software Engineer
gholl@us.ibm.com

ITIL Foundations Certified
IBM Certified Deployment Professional
       --Tivoli Data Warehouse v1.2
       --Tivoli Enterprise Console v3.8 Network Management

IBM Software Group - Tivoli Software
Research Triangle Park,  North Carolina.



"Delaire, Patrick" <delairep@aetna.com>
Sent by: owner-nv-l@lists.us.ibm.com

03/14/2005 06:51 PM
Please respond to
nv-l

To
<nv-l@lists.us.ibm.com>
cc
Subject
[nv-l] NVTECIA -STOP





Platform: AIX 5.1 runnig Netview 7.1.4 with FP002

Just issued a nvtecia -stop command to stop TCE interface and the Netview event window stopped processing.
Had to stop and restart all daemons to reactivate the event window.
What is happening here? Do I need TME communications method for TEC in serversetup dailog active?

 

 


This e-mail may contain confidential or privileged information. If you
think you have received this e-mail in error, please advise the sender by
reply e-mail and then delete this e-mail immediately. Thank you. Aetna

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web