Re: [nv-l] Threshold Levels

[usman.taokeer@s-iii.com]

Paul,

Sure here is the required info: -

mibExpr.conf:

BitsIn \
"ifInOctets * 8" \
         .1.3.6.1.2.1.2.2.1.10.
 8 *

snmpCol.conf:
MIB BitsIn .* BitsIn units _expression_ R lansrv
C KHI-GW-01:Serial0/0 0xffffffff 5 > 5.000000 <=
75.000000 % s 1001


Let me explain once again what i am trying to do. We have
multiple serial links on our core router (Cisco3745) to internet, we want
to monitor incoming and outgoing traffic on those links and set threshold
if certain levels are reached and pass traps and generate alerts based
on that etc. Will that going to help us out or is there any other way around?
I tried the SnmpCollector but it just doesn't show any data, it shows for
others etc. bandwidthutilhdx,avgBusy etc. But not the ones i am trying
to configure.

Paul <pstroud@bellsouth.net>
Sent by: owner-nv-l@lists.us.ibm.com

04-05-05 04:27 PM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] Threshold Levels

Usman,
This is exactly what snmpCollect is designed to do. You mention you want
to
collect using an _expression_? Have you create that _expression_ in the 
mibExpr.conf
file? If so, it would help if you posted it. You might also want to copy
your snmpCol.conf
entry here so we can see that also. Not much we can do with the 
information you
have given.

Paul


usman.taokeer@s-iii.com wrote:

>
> Hi,
>
> I am using NetView 7.1.4 with FP3 installed, i need to configure 
> Threshold levels on certain interfaces of our core router(Cisco3745),
> can any help me out in this regard, i also want to generate traps
> against those thresholds.I tried using SNMP Collector but was not
able 
> to figure it out it just doesn't collect data for what ever _expression_
> i define? e.g IfBitsin etc.
>
>  
>
> Regards,
>
> Usman Taokeer
> Associate Network Architect
> Si^3
>