To: | nv-l@lists.us.ibm.com |
---|---|
Subject: | Re: [nv-l] What is Default FMT:TEST?? |
From: | usman.taokeer@s-iii.com |
Date: | Fri, 6 May 2005 16:57:45 +0500 |
Delivery-date: | Fri, 06 May 2005 12:56:42 +0100 |
Envelope-to: | nv-l-archive@lists.skills-1st.co.uk |
In-reply-to: | <427B5098.9010701@bellsouth.net> |
Reply-to: | nv-l@lists.us.ibm.com |
Sender: | owner-nv-l@lists.us.ibm.com |
Paul, Yes there are equal number of Type-2 and Type-3 messages, the damn switch is sending a message for every node that goes down, and as its a LAN so when ever any one shuts down his PC the switch sends this trap. i ve manually disable the switch to send any kind of traps lets what happens... Thanks for your response! ~Usman
Usman, I would expect if you are getting a lot of generic type 2 messages you are also receiveing a large number of generic type 3 messages. It sounds like you have a link that is trying to (re)establish a link to something(WAN?) and is unsuccessful and (re)tries on a regular basis to reconnect. This would have an almost equal number of type 2 and type 3 messages. If you are only receiving type 2 messages, I would think something is misconfigured on the device itself. Have you checked the configuration of the switch to see if it is actually configured to send traps to NetView, or possibly to another network manager that is sending them to NetView? I can tell you from the trap information that you should take a look at what is on Interface(port?) 21(ifIndex) and that it is reporting Administratively Up, but Operationally down. Paul usman.taokeer@s-iii.com wrote: > > Hi all, > > I am having too many events with the following details: - > > * DEFAULT FMT: TEST (1.3.6.1.6.3.1.1) generic:2 specific:0 args(3):* > * [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.21 (Integer): 21* > * [2] mib-2.interfaces.ifTable.ifEntry.ifAdminStatus.21 (Integer): 1* > * [3] mib-2.interfaces.ifTable.ifEntry.ifOperStatus.21 (Integer): 2* > > Its coming from one of our LAN switches, the thing is that i havent > configured this switch to forward any traps to NetView. Why am i > having these events? > > Regards, > > Usman Taokeer > Associate Network Architect > Si^3 > UAN: 111.111.743 > EXT: 115 > FAX: 92.21.2425357 > > ------------------------------------------------------------------------ > > *DISCLAIMER* > This email message is for the sole use of the intended recipient(s) > and may contain confidential and privileged information. Any > unauthorized review, use, disclosure or distribution is prohibited. If > you are not the intended recipient, please contact the sender by reply > email and destroy all copies of the original message. Any views > expressed in this message are those of the individual sender, except > where the sender specifically states them to be the views of Si3. > |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [nv-l] Switch Analyzer, usman . taokeer |
---|---|
Next by Date: | RE: [nv-l] snmp: how can I set sysContact field, Evans, Bill |
Previous by Thread: | Re: [nv-l] What is Default FMT:TEST??, Paul |
Next by Thread: | RE: [nv-l] What is Default FMT:TEST??, Glen Warn |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Archive operated by Skills 1st Ltd
See also: The NetView Web