James is correct, I downloaded the SNMPv1 version of the mib from Cisco.
My NetView is backleveled, version 6.02, AIX 4.3.3.
Ernie Dusett
IBM Global Services - Network Management Services
Phone: (585)723-4311 Tie: 451 Fax: (585)720-7654
Pager: http://www.arch.com/cgi-bin/wwwpreproc.exe?PIN=5852381622
Internet: edusett@us.ibm.com
James
Shanks/Raleigh/IB
M@IBMUS To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
Re: [nv-l] Cannot load a mib
06/29/2005 09:08
AM
Please respond to
nv-l
Paul,
The original version is SNMPv2, but Cisco has an SNMPv1 version of that MIB
out on ftp://ftp.cisco.com/pub/mibs/v1/. I think that's what Ernie has.
The one I downloaded will load just fine with xnmloadmib on my box, AIX
4.3.3. with NetView Version 7.1.4 FP03. And trying to load an SNMPv2 MIB
with the V1-only loader, should just result in an error message, not a seg
fault. There's code in there that should catch it.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Paul
<pstroud@bellsout
h.net> To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
Re: [nv-l] Cannot load a mib
06/29/2005 09:01
AM
Please respond to
nv-l
Ernie,
I have looked at the mib, and it is a v2 mib which means it will not load
at all into the xnmloadmib GUI. I don't know what version of NetView
you are on, or what platform, but you can try using xnmloadmib2(which
has been deprecated in the latest versions of NetView) or you can use
the java based mibloaderpanel.
Paul
Ernie Dusett wrote:
>
>
>I am trying to load a Cisco mib (cisco-entity-fru-control-mib.v1smi.my)
and
>after a minute or 2, the xnmloadmib GUI abends, I receive error message "
>Segmentation fault(coredump)" and a core file is created (unreadable). I
>have unloaded and reloaded other mibs, so I know it can be done. Is this
>just a bad mib? Or do I have another issue?
>
>Thanks,
>Ernie Dusett
>IBM Global Services - Network Management Services
>Internet: edusett@us.ibm.com
>
>
>
>
|