RE: [nv-l] Node Status does not change

[Mike Pearson <pearsom@us.ibm.com>]

Usman:
        No,
we can not recommend a way to do this, just as we do not recommend the
type of emulator, such as Exceed etc, to access UNIX machines from Windows.
 Others have used Exceed as an emulator just as others have used VNC
to log on to the NetView machine.  Your choice would have to be based
on the experiences of others.  I am sorry but that is the best advice
I can give you.

Regards, 
Michael Pearson

Tivoli NetView for UNIX and NT Support
Building 660, Office  CC105B;
HWY. 54 & 600 PARK OFFICES DR
Research Triangle Park, N.C. 27709
(919) 254-2270
pearsom@us.ibm.com
******************************************************************

******************************************************************
Need help with Tivoli Software Products? 
Ask Tivoli! 
http://www.tivoli.com/asktivoli

usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com

07/08/2005 09:31 AM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	RE: [nv-l] Node Status does not change

Mike,
 
The Tivoli server is in our DataCenter,
now i can't go in there and log on to the machine to work, is there any
recommended way to access Tivoli Serves remotely?
 
Regards,
usman
-----owner-nv-l@lists.us.ibm.com
wrote: -----

To: nv-l@lists.us.ibm.com
From: Mike Pearson <pearsom@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
Date: 08/07/2005 04:29PM
Subject: RE: [nv-l] Node Status does not change


Yes, NetView does not work if Terminal Services are used in any way to
connect to NetView. 

Regards, 
Michael Pearson 

Tivoli NetView for UNIX and NT Support 
Building 660, Office  CC105B; 
HWY. 54 & 600 PARK OFFICES DR 
Research Triangle Park, N.C. 27709 
(919) 254-2270 
pearsom@us.ibm.com 
****************************************************************** 

****************************************************************** 
Need help with Tivoli Software Products? 
Ask Tivoli! 
http://www.tivoli.com/asktivoli

"praveen kumar" <praveenkumar.nair@ustri.com>
Sent by: owner-nv-l@lists.us.ibm.com

07/07/2005 11:52 PM

Please respond to
nv-l

To	<nv-l@lists.us.ibm.com>
cc
Subject	RE: [nv-l] Node Status does not change

Hi all, 
Are there any issues if we connect through terminal service? And apply
commands???

Praveen kumar praveenkumar.nair@ustri.com	721, Nila Technopark, Trivandrum Tel: ++91-471-2335777 extn 8652 Cell: ++91-934-914-0942

 
 

---

From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Mike Pearson 
Sent: Thursday, July 07, 2005 9:34 PM 
To: nv-l@lists.us.ibm.com 
Subject: Re: [nv-l] Node Status does not change 
  

Just a wild question but are you using Terminal Services to access NetView
in any way? 

Regards, 
Michael Pearson 

Tivoli NetView for UNIX and NT Support 
Building 660, Office  CC105B; 
HWY. 54 & 600 PARK OFFICES DR 
Research Triangle Park, N.C. 27709 
(919) 254-2270 
pearsom@us.ibm.com 
****************************************************************** 

****************************************************************** 
Need help with Tivoli Software Products? 
Ask Tivoli! 
http://www.tivoli.com/asktivoli

usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com

07/07/2005 11:56 AM

Please respond to
nv-l

To	nv-l@lists.us.ibm.com
cc
Subject	[nv-l] Node Status does not change

 

Hi,

We are using Netview 7.1.4 FP3. My NetView Map shows all nodes as Yellow (marginal). It was working fine but suddenly all the nodes staus changed. Dont know what is wrong, i logged in to one router manually shut down and and no shut an interface then its status changed in the MAP (back to green). What is wrong, is it Switch Analyzer or some NetView Deamon.

What should i look for?

Regards,
Usman Taokere
Si3