Glen one more thing is snmp-server
contact and snmp server location is not configured in the pix will it prevent
the monitoring of the cpu?
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of praveen kumar
Sent: Tuesday, September 20, 2005
12:57 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] % cpu
utilization
Hi Glen ,
Thanks for your response,
I am able to monitor the memory
utilization successfully, so the community string or snmp protocol will not be
a problem, I guess.
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of Glen Warn
Sent: Monday, September 19, 2005
10:31 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] % cpu
utilization
Am sure the answer here is yes, but I have
to ask - can you do a simple demand poll or snmp query? I have had one
problem where I had a $ in my comm string and it only worked with certain
queries. You might try a temp comm string for testing too? Lastly,
have you setup the appropriate snmp parameters on the PIX? See sample
below - be sure your nearest interface to the Netview is specified.
If you have access to the pix, I believe there is a debug SNMP command, if not
you could do a debug packet on the interface in question with Netview as the
src and your pix interface as the dst.
snmp-server host INTERFACE_NAME
ip_addr
snmp-server location XXXXXX
snmp-server contact YYYYYY
snmp-server community ZZZZZZZ
snmp-server enable traps
Hope this helps,
Glen Warn
PEMCO Corporation Computer Services (PCCS)
glen.warn@pemcocorp.com
206-628-5770
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of praveen kumar
Sent: Monday, September 19, 2005
3:32 AM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] % cpu utilization
Hi all,
I am running netview 7.1.4 windows-2003
I am successfully monitoring the cpu utilization of all my
pix firewall version 6.3 in one of my pix the utilization is showing always
zero .I do not know why ,would anyone help me in trouble shooting this problem
True regards,
Praveen