RE: [nv-l] Missing manager submap

[Leslie Clark <lclark@us.ibm.com>]

Yes, there is only the default map.
And the Manager Submap is missing from that map. So we want it to make
that map over again from scratch, and see if it will inlcude the Manager
Submap this time, because everything is now in place for it to make it
(the two lines in the snmpd.conf, etc.). We can get it to start over by
doing the automatic regen. That will discard the map 'default', clear the
topology database, clear the object database, rebuild the smartset objects,
and restart discovery.  So no, there is no need to delete anything
first. There will be no map until you bring up the gui for the first time.
 Well, unless netviewd comes up, then it will make the map. Come to
think of it, it might be a good idea to disable netviewd before you do
it, just to eliminate that factor. 

So, to recap:

ovdelobj /usr/OV/lrf/netviewd.lrf  
(can also be unregistered in serversetup, but this works)
In serversetup, control... restart automatic
map generation
When that finishes, start the map r/w
  (as root)

It should come up with the Manager Submap.
 If it does not, then you have a repeatable problem. 

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: owner-nv-l@lists.us.ibm.com

10/24/2005 01:13 PM

Please respond to
nv-l

To	<nv-l@lists.us.ibm.com>
cc
Subject	RE: [nv-l] Missing manager submap

You lost me - which map is it
missing from?  there is only the default map now.  you mean I
should delete the Neview servers and then run automatic map generation?
 
 
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Clark, Leslie (IBM.)
Sent: Monday, October 24, 2005 11:51 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Missing manager submap


Since it is the map that it is missing from, I'd try deleting the map and
recreating it. Do that with the restart automatic map generation. Unless
you've already tried that. 

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: owner-nv-l@lists.us.ibm.com

10/24/2005 11:43 AM

Please respond to
nv-l

To	<nv-l@lists.us.ibm.com>
cc
Subject	RE: [nv-l] Missing manager submap

the lines are in snmp.conf and snmpd is running.  and the linux netview
server is specific in xnmsnmpconf.  any other ideas?  thanks
  
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Clark, Leslie (IBM.)
Sent: Monday, October 24, 2005 10:24 AM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Missing manager submap


I had that once on a SLES 9 box. After I put those two lines in snmpd.conf,
made sure snmpd was running, put the entries for the Netview server in
snmsnmpconf, and cleared the database, it came back. 

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: owner-nv-l@lists.us.ibm.com

10/24/2005 09:37 AM

Please respond to
nv-l

To	<nv-l@lists.us.ibm.com>
cc
Subject	[nv-l] Missing manager submap

Folks:

I'm doing this port of our aix installtion to linux and I'm missing the manager submap when I bring up netview.  What would cause this?  The smartset netviews has all my netview servers in it, though.  Thanks in advance