Hi List.
Finally, We can integrated CiscoWork with Netview on AIX 5.2, following the
advice given for you!!!
The procedure we followed is this:
1) Install CiscoWork Integration in Netview on AIX 5.1.
2) Install Netview Server on AIX 5.2
2) Copy some configuration files such as oid_to_type, oid_to_sym, files in
/usr/OV/fields, /usr/OV/symbols, /usr/OV/snmp_mibs, usr/OV/registrations,
/usr/OV/conf and etc...etc..
3) Copy the folder created in the installation of CiscoWork Utility, by
default is /usr/CSCOpx
4) Execute the nmic.sh script over /usr/CSCOpx/bin ---> You are going to
see a warning message like (Error: Wrong version of
/opt/CSCOpx/lib/jre2/sh/../bin/java for this version of AIX) This is the
issue for the version of AIX..but ignore it and continue with the
process...
Finally restart the daemons... later, you can see the new option in the
menu and all the functionalities of Cisco Work Integration.
Thanks very much...
Saludos,
Anabella GD.
"Brinkworth, Rob"
<rob.brinkworth@l
andg.com> Para
"'Anabella_Gonzalez@banesco.com'"
06/01/2006 04:40 <Anabella_Gonzalez@banesco.com>
a.m. cc
"'nv-l@lists.us.ibm.com'"
<nv-l@lists.us.ibm.com>
Asunto
RE: [nv-l] Error Integrating
Netview - CiscoWork
Hi Anabella,
Unix is not my speciality - I just about "get by". However, if you have a
tame Unix guru (or you are one yourself) you might be able to get the
installation to run. I changed a section which I found which appeared to be
doing the AIX version check. The installation ran a little further and then
failed again!
One problem with this is that, even if you get it to work, it almost
certainly won't be supported.
You could manually copy the MIB files, oid_to_type, oid_to_sym, etc, etc,
from the 5.1 system, but it's a lot of work and extremely difficult not to
miss something. Perhaps if anyone's done this successfully and documented
exactly what they did they could let us know.
Perhaps the best thing to do would be for all of us affected by this to
apply some pressure on Cisco in the hope they might provide a version that
runs on AIX 5.2 and 5.3. If nobody moans they probably think there's no
demand.
Gook luck.
Rob.
-----Original Message-----
From: Anabella_Gonzalez@banesco.com
[mailto:Anabella_Gonzalez@banesco.com]
Sent: 05 January 2006 16:05
To: rob.brinkworth@landg.com
Cc: 'nv-l@lists.us.ibm.com'
Subject: Re: [nv-l] Error Integrating Netview - CiscoWork
Hi Rob.
Thanks very much...
It is really bad that situation, because we need to migrate the Netview
Server from AIX 5.1 to AIX 5.2 and we are not able to do that, and this is
critical for us...
I don't know, if we can do something to force the installation and obtain
the benefits of integrated Netview and CiscoWork......can you give me some
idea about that..!!...
I really appreciate any suggestion....
Thanks again...
Saludos,
Anabella
"Brinkworth, Rob"
<rob.brinkworth@l
andg.com> Para
"'nv-l@lists.us.ibm.com'"
05/01/2006 10:00 <nv-l@lists.us.ibm.com>
a.m. cc
"'Anabella_Gonzalez@banesco.com'"
<Anabella_Gonzalez@banesco.com>
Asunto
[nv-l] Error Integrating Netview -
CiscoWork
Anabella,
The latest available version of Ciscoworks Integration Utility, which is
the
version you are using, does not support AIX 5.2. It's for AIX 5.1 only.
Cisco do not seem very keen to keep up-to-date with AIX releases as it
feels
it has too few customers using NetView for AIX to make it worth their
while.
It's a real shame for those of us in this situation (again!).
Best Regards,
Rob Brinkworth.
This e-mail (and any attachments) may contain privileged and/or
confidential information. If you are not the intended recipient please do
not disclose, copy, distribute, disseminate or take any action in reliance
on it. If you have received this message in error please reply and tell us
and then delete it. Should you wish to communicate with us by e-mail we
cannot guarantee the security of any data outside our own computer systems.
For the protection of Legal & General's systems and staff, incoming emails
will be automatically scanned.
Any information contained in this message may be subject to applicable
terms and conditions and must not be construed as giving investment advice
within or outside the United Kingdom.
The following companies are subsidiary companies of the Legal & General
Group Plc which are authorised and regulated by the Financial Services
Authority for advising and arranging the products shown: Legal & General
Partnership Services Limited (insurance and mortgages), Legal & General
Insurance Limited (insurance), Legal & General Assurance Society Limited
(life assurance, pensions and investments), Legal & General Unit Trust
Managers Limited and Legal & General Portfolio Management Services Limited
(investments).
They are registered in England under numbers shown.
The registered office is Temple Court, 11 Queen Victoria Street, London
EC4N 4TP.
Legal & General Partnership Services Limited: 5045000 Legal & General
Assurance Society Limited: 166055 Legal & General (Unit Trust Managers)
Limited: 1009418 Legal & General (Portfolio Management Services) Limited:
2457525 Legal & General Insurance Limited: 423930
They are registered with the Financial Services Authority under numbers
shown. You can check this at www.fsa.gov.uk/register
Legal & General Partnership Services Limited: 300792 Legal & General
Assurance Society Limited: 117659 Legal & General (Unit Trust Managers)
Limited: 119273 Legal & General (Portfolio Management Services) Limited:
146786 Legal & General Insurance Limited: 202050
-----------------------------------------
***REGULACIÓN DE USO DEL CORREO ELECTRÓNICO DE Banesco Banco Universal
HACIA INTERNET***
La información contenida en este correo electrónico y cualquier anexo
puede ser de carácter confidencial y es propiedad de Banesco Banco
Universal. Sólo está permitido su uso, copia, transmisión, recepción o
distribución a personas debidamente autorizadas. Si usted recibió este
correo por error por favor destrúyalo y/o elimine cualquier copia
guardada en su sistema y notifique inmediatamente al remitente o a la
dirección de correo electrónica mailmaster@banesco.com. Usted no debe
utilizar la información contenida para ningún propósito ni compartirla
con otras personas.
***REGULATION OF USE
FOR ELECTRONIC MAIL OF Banesco Banco Universal TOWARDS INTERNET***
The information contained in this electronic mail and any attachment
can be of confidential character and is property of Banesco Banco
Universal. Its use, copy, transmission, reception or distribution is
allowed only to properly authorized people. If you received this mail
by error please destroy it and/or eliminate any copy kept in your
system and notify immediately to the sender or to the electronic mail
address mailmaster@banesco.com. You should not use the information
contained in this email for any purpose nor to share it with other
people.
|