Re: [nv-l] Propagating Node status on TRAPS

[usman.taokeer@s-iii.com]

I just put the Routers IP Address in
the Seed file with '$' now when the trap comes-in i can see the status
change on the IP MAP.

usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com

09-05-06 05:42 PM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc	nv-l@lists.us.ibm.com, owner-nv-l@lists.us.ibm.com, fatih.celen@impetus.ae, Nooruddin_Abbas_Ali/PS/TDS/Si3@s-iii.com
Subject	Re: [nv-l] Propagating Node status on TRAPS

Hi Leslie, 

I found this in the "netmon.conf" file 

# Set to TRUE to ignore Link Up/Link Down traps
NV_NETMON_IGNORE_LINK_UPDN=FALSE 

The second line was remarked i removed the remark, did start/stop netmon
, but yet i dont see the change on IP MAP for the specific interface!

Regards, 

Usman Taokeer 
Si3.

Leslie Clark <lclark@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com

09-05-06 04:34 PM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] Propagating Node status on TRAPS

Check in /usr/ov/conf/netmon.conf. On Unix, there is an option in there
that controls whether or not Netview will respond to generic traps by immediately
checking the current status. Perhaps that's where it is controlled on Windows
as well. 

And no, no mibs are required for this. 

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com

05/09/2006 04:30 AM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc	fatih.celen@impetus.ae, Nooruddin_Abbas_Ali/PS/TDS/Si3@s-iii.com, nv-l@lists.us.ibm.com, owner-nv-l@lists.us.ibm.com
Subject	Re: [nv-l] Propagating Node status on TRAPS

Just to add to it, do we need to load any specific MIBs to get that functionality?

usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com

08-05-06 02:08 PM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc	fatih.celen@impetus.ae, Nooruddin_Abbas_Ali/PS/TDS/Si3@s-iii.com
Subject	[nv-l] Propagating Node status on TRAPS

Hi List, 

NV 7.1.4 FP04 
Windows 2003 SP1 

We have a Cisco router configured to forward traps to Netview server whenever
the Serial Link goes down! . The Netview is receiving traps successfully
but on the IP MAP the Interface status  does not reflect the TRAP
i.e When a 'link down' trap is received on Netview the Interface status
stays 'GREEN'. It is only updated on the scheduled SNMP Poll. What else
needs to be done on the Netview part to make it reflect the change on the
'IP MAP' level! 

Regards, 

Usman Taokeer 
Si3