nv-l
[Top] [All Lists]

Re: [NV-L] servmon probably died: ungracefully disconnected from trapd

To: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
Subject: Re: [NV-L] servmon probably died: ungracefully disconnected from trapd
From: sean.lawrence@cantire.com
Date: Wed, 4 Oct 2006 09:23:50 -0400
Delivery-date: Wed, 04 Oct 2006 14:24:59 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-request@lists.ca.ibm.com?subject=help>
List-id: Tivoli NetView Discussions <nv-l.lists.ca.ibm.com>
List-post: <mailto:nv-l@lists.ca.ibm.com>
List-subscribe: <http://lists.ca.ibm.com/mailman/listinfo/nv-l>, <mailto:nv-l-request@lists.ca.ibm.com?subject=subscribe>
List-unsubscribe: <http://lists.ca.ibm.com/mailman/listinfo/nv-l>, <mailto:nv-l-request@lists.ca.ibm.com?subject=unsubscribe>
Reply-to: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
Sender: nv-l-bounces@lists.ca.ibm.com
No I did not write it. The guy who did is long since gone. Really all we 
are using Netview for is a trap handler. We do not do any kind of 
polling/correlation/ruleset processing in Netview at all. Personally I 
feel that Netview is a huge overhead for what we are using it for. I have 
had zero training on this tool and I would imagine it shows.

Sean Lawrence
Systems Automation
Ext 5728




James Shanks <jshanks@us.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/04/2006 09:16 AM
Please respond to Tivoli NetView Discussions

 
        To:     Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
        cc: 
        Subject:        Re: [NV-L] servmon probably died: ungracefully 
disconnected from trapd


Your ruleset is forwarding to TEC all traps which DO NOT have an origin 
address of either 42.231.8.3, 42.2.1.12, 42.2.1.13,  or 0.0.0.0.  Very strange 
logic. It's nothing like our standard one, 
TEC_ITS.rs.  I take it by your comments that you didn't write it. 

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
sean.lawrence@cantire.com


sean.lawrence@cantire.com 
Sent by: nv-l-bounces@lists.ca.ibm.com 
10/04/2006 08:14 AM 

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>




To

Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

cc


Subject

Re: [NV-L] servmon probably died: ungracefully disconnected from trapd





That's interesting, to add a new trap to netview forwarded to TEC all we 
have done is set the TEC event class, slot mapping and turned forward trap 

on. The ruleset defined in /usr/OV/conf/tecint.conf is test.rs. The 
contents of which I have included below. I have never 
edited this ruleset. I have no idea what it is doing.

Now I know why I can't turn the TEC forwarding off on a trap by turning 
off the forward trap in netview. This always seemed odd to me. 

RuleSet2 RuleSet EventAttr3
"" 0
EventAttr3 EventAttr EventAttr4
Origin 1 42.231.8.3 "" 0
EventAttr4 EventAttr EventAttr5
Origin 1 42.2.1.12 "" 0
EventAttr5 EventAttr EventAttr6
Origin 1 42.2.1.13 "" 0
EventAttr6 EventAttr ForwardCorr7
Origin 1 0.0.0.0 "" 0
ForwardCorr7 ForwardCorr
""

Sean Lawrence
Systems Automation
Ext 5728




James Shanks <jshanks@us.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/03/2006 06:12 PM
Please respond to Tivoli NetView Discussions


       To:     Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
       cc: 
       Subject:        Re: [NV-L] servmon probably died: ungracefully 
disconnected from trapd


No. The "Forward trap" button in xnmtrap is just to identify traps to be 
sent to another trapd. It has nothing to do with TEC. But the TEC Event 
Class and optional slot mappings are used by the internal TEC adapter, 
which is part of nvserverd, to build the event sent to TEC.

To forward to TEC you must include the trap in whatever ruleset you are 
using for TEC Forwarding. The name of that ruleset is found in 
/usr/OV/conf/tecint.conf, which you created when you used serversetup the 
first time to configure TEC Forwarding. You can see it in serversetup if 
you click that option again. If you want to add a new trap to that 
existing ruleset then you have edit the ruleset using nvrsEdit, the Rule 
Set Editor. And then you have to either restart nvserverd or get him to 
reload that ruleset with the nvtecia command.

The deal is this. All events are seen by trapd, who gives them to nvcorrd, 

who runs them through rulesets on behalf of his client, nvserverd. 
nvserverd then gets all the events that were selected and passed by each 
ruleset, and distributes those to his clients. His clients are either 
event windows or the TEC adapter code. nvserverd is like a waiter who 
passes the orders (events) out to customers after they have ordered them. 
And he fixes 'em up just the way they like 'em, either formatted for the 
event display or formatted for TEC. It's what he does.

Does this help?

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
sean.lawrence@cantire.com


sean.lawrence@cantire.com 
Sent by: nv-l-bounces@lists.ca.ibm.com 
10/03/2006 01:07 PM 

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>




To

Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

cc


Subject

Re: [NV-L] servmon probably died: ungracefully disconnected from trapd





Ok that cleared some things up. We are forwarding to TEC.  Is the "Forward 

trap" option not required to send messages to TEC? This is how our 
production 
system is setup.

Sean Lawrence
Systems Automation
Ext 5728




James Shanks <jshanks@us.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/03/2006 12:44 PM
Please respond to Tivoli NetView Discussions


      To:     Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
      cc: 
      Subject:        Re: [NV-L] servmon probably died: ungracefully 
disconnected from trapd


Well, this forum is not a substitute for IBM service. I think you should 
reopen your PMR and get some more help.
Because none of this is relevant to your problem it seems to me. 


Are you trying to forward traps to TEC and that isn't working?
Or are you trying to forward traps to another trapd and that isn't 
working?
Or neither?

But servmon has nothing to do with any forwarding and my guess is that you 


aren't even using him. If his conf file has nothing for him to do, he 
shuts down. You can go look in the servmon.log as the ovstatus suggests 
and verify that. If you aren't using him then you can remove him from the 
startup with 
ovdelobj /usr/OV/lrf/servmon.lrf
and then you won't see those messages.

The ugly error message is TEC means that trapd.conf is configured to 
forward trap 1.3.6.1.4.1.9.9.42.2, specific trap 2, to another traps, but 
trapd has not been configured to 
do that. If you trying to forward to another trapd then you must use 
serversetup to configure trapd and tell him the hostname of the other 
trapd. If you aren't trying to do that, then you can get rid of the 
message by using xnmtrap. Apparently this trap has the "Forward trap" 
button set on for it in trapd.conf. Use xnmtrap and find enterprise 
1.3.6.1.4.1.9.9.42.2, specific trap 2, and click the button to turn it 
off. Then that ugly 
error message will go away.

Hope this helps. If not, then I'd try Level 2 again and stay with them 
until they fix your problem. That's what they are there for.


James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
sean.lawrence@cantire.com


sean.lawrence@cantire.com 
Sent by: nv-l-bounces@lists.ca.ibm.com 
10/03/2006 12:29 PM 

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>




To

Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

cc


Subject

Re: [NV-L] servmon probably died: ungracefully disconnected from trapd





I opened a PMR last week and was told to start netview using /etc/netnmrc 
command everything was working. Now forwarding is not working again and 
restarting everything is not solving the problem.


When I log into Netview I get the message:

WARNING: The following REGISTERED daemons are not running:
servmon

When a trap should be forwarded to TEC the following message is displayed 
in the nvserverd.log and nothing get forwarded.

10/03/06 11:47:33 
TEC_ITS_FATAL_ERROR;source=nvserverd;sub_source=T;origin=42.108.20.106;adapter_host=tst161.cs.ctc;host
name=<none>;category=4;date="10/03/06 
11:47:33";status=OPEN;nvhostname=42.108.20.106;msg="Event 
1.3.6.1.4.1.9.9.42.2, (6
, 2) to be forwarded, but trapd not configured to forwarding event";END

ovstatus shows

object manager name: servmon
behavior:            OVs_WELL_BEHAVED
state:               NOT_RUNNING
PID:                 -
last message:        Exited. Please see log file for more info.
exit status:         exit(0)

Sean Lawrence
Systems Automation
Ext 5728




James Shanks <jshanks@us.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/03/2006 12:17 PM
Please respond to Tivoli NetView Discussions


     To:     Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
     cc: 
     Subject:        Re: [NV-L] servmon probably died: ungracefully 
disconnected from trapd


What problem are you trying to solve?

None of this looks relevant to servmon. 

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)



_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)


*** eSafe scanned this email for malicious content ***
*** IMPORTANT: Do not open attachments from unrecognized senders  ***
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)



_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)


*** eSafe scanned this email for malicious content ***
*** IMPORTANT: Do not open attachments from unrecognized senders  ***
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)



_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)


*** eSafe scanned this email for malicious content ***
*** IMPORTANT: Do not open attachments from unrecognized senders  ***
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)



_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web