Ok this got bounced
yesterday for size, here is a resend:
Well here are the results after editing
the TECIO to this:
#
# MODULE = TECIO
#
TECIO
MINOR
/usr/ov/log/nvtecad.log
TECIO
MAJOR
/usr/ov/log/nvtecad.log
TECIO
FATAL
/usr/ov/log/nvtecad.log
TECIO
LOW
/usr/ov/log/nvtecad.log
TECIO
NORMAL
/usr/ov/log/nvtecad.log
TECIO
VERBOSE
/usr/ov/log/nvtecad.log
The tecad_nv6k process again jumped to 50%
of use after the first TEC event was forwarded and never dropped back down
(been 10 minutes) thus the closing event when the node came back up was never
forwarded…
The nvtecad.log file after restarting
tecad_nv6k svc:
Wed Dec 13 15:26:26 2006
LOW: TECIO , err 00, .\tec_io.c
line 0110: Initializing T/EC interface ...
Wed Dec 13 15:26:26 2006
LOW: TECIO , err 00, .\tec_io.c
line 0180: T/EC interface initialization complete
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0276: Sending event to T/EC ...
TEC_ITS_INTERFACE_STATUS;source=NV6K;sub_source=NET;origin=x.x.x.101;adapter_host=NetviewServer;hostname=TestServerNode;msg='Interface
Intel down. CRITICAL';category=2;ifstatus=2;ifname=762;hostaddr=x.x.x.101;nvhostname=y.y.y.30;END
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0313: Event sent to T/EC
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0276: Sending event to T/EC ...
TEC_ITS_NODE_STATUS;source=NV6K;sub_source=NET;origin=x.x.x.101;adapter_host=NetviewServer;hostname=TestServerNode;msg='Node
Down. ';category=2;nodestatus=2;nvhostname=y.y.y.30;END
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0313: Event sent to T/EC
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0276: Sending event to T/EC ...
TEC_ITS_SEGMENT_STATUS;source=NV6K;sub_source=NET;origin=y.y.y.30;adapter_host=NetviewServer;category=2;msg='Segment
x.x.Segment1 Marginal.';segstatus=3;nvhostname=y.y.y.30;END
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0302: Event filtered by tec_put_event()
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0303: No event sent to T/EC
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0276: Sending event to T/EC ...
TEC_ITS_NETWORK_STATUS;source=NV6K;sub_source=NET;origin=y.y.y.30;adapter_host=NetviewServer;category=2;msg='Network
x.x
Marginal.';netstatus=3;nvhostname=y.y.y.30;END
Wed Dec 13 15:27:31 2006
LOW: TECIO , err 00, .\tec_io.c
line 0313: Event sent to T/EC
Again, thanks for any help anyone can give
I’m long since out of ideas…
Eric
-----Original Message-----
From: nv-l-bounces@lists.ca.ibm.com
[mailto:nv-l-bounces@lists.ca.ibm.com] On
Behalf Of James Shanks
Sent: Wednesday, December 13, 2006 1:24 PM
To: Tivoli NetView Discussions
Subject: RE: [NV-L] TEC Event
Forwarding Intermittently Failing on 7.1.5
You can edit tecad_nv6k.err to get some tracing. The first thing to do
is to route all messages for TECIO to the log file and see what you get after
the thing restarts. If NetView isn't sending the event on to the TEC library
code, you should notice that here. But if you see the event was sent, then the
TEC library has it, and what happens after that is a TEC issue.
The TEC folks would have to give you a tec_diag_config file (or you can get one
from the TEC SDK) and have you run their trace.
James Shanks
Level 3 Support for Tivoli
NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
"Cooprider, Eric" <ecooprider@ycsd.york.va.us>