|
Yes, your response answers my concerns.
Thank you!
Eric
Zoeckler
IS
Analyst - Network Control Center
Data Center Operations
nationalgrid
Henry Clay Blvd. Bldg.
3
NCC Phone: (315)
460-2600
Office
Phone: (315) 460-2519
NCC Email Group: US IT
NCC
Eric.Zoeckler@us.ngrid.com
Sorry to take so long to reply. I was in class all last week and the
performance expert was also unavailable.
But the short answer is that
whatever you had to run NetView 7.1.4 successfully will be the same to run
7.1.5, because basically there is no measurable performance difference, or so my
source says.
And to run the web console, he suggests at least 512MB of
memory and a "modern" processor speed with a 100MB network connection. That's
what's critical to a successful web client. Whether you have one processor or
many the requirement is the same.
When it comes to figuring out how much
capacity the server will need to discover and monitor the network,
multiprocessors are better than single ones. And no one would configure a
multiprocessor box with processors of different speeds, because the lower speed
one(s) would always run poorly. That makes sense, doesn't it?
Is this
short answer enough? Because you can open a problem to Support and get specific
recommendations for your network and environment if that's what you really
require. I think that might be a better way to go if you are still in doubt,
because otherwise we'll be endlessly hashing and rehashing on this list what the
NetView books say about performance and what folks have experienced in the real
world.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and
Windows
Network Availability Management
Network Management -
Development
Tivoli Software, IBM Corp
 "Zoeckler, Eric A."
<Eric.Zoeckler@us.ngrid.com>
"Zoeckler, Eric A."
<Eric.Zoeckler@us.ngrid.com>
Sent by:
nv-l-bounces@lists.ca.ibm.com
01/26/2007 03:28 PM
|
Please respond to
Tivoli
NetView Discussions
<nv-l@lists.ca.ibm.com> | |
|
Can anyone clarify the processor speed requirements for running the
web console on nv 7.1.5 on AIX? Tha 7.1.5 installation guide says
minimum=450MHz, recommended= 1GHz. It also recommends two processors if
monitoring more that 4000 interfaces. The question is this, do the processor
speed requirments apply to each individual processor in a multiprocessor
box?
Thank you in advance for you assistance
Eric Zoeckler
IS Analyst - Network Control Center
Data Center
Operations
nationalgrid
Eric.Zoeckler@us.ngrid.com
**** For your information: the Rhode Island Operations of New
England Gas Company have been acquired by National Grid and are now doing
business under that name. ****
This e-mail and any files transmitted with it, are confidential
to National Grid and are intended solely for the use of the individual or entity
to whom they are addressed. If you have received this e-mail in error,
please reply to this message and let the sender
know._______________________________________________
NV-L mailing
list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser
access limited to internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
| 