I had the same issue. The PMR I opened led
to the following fix for us.
DCF Document ID: 1253391 - IBM Tivoli NetView: IY93335 NVSERVERD DIES
WITH SIGNAL 6 AFTER APPLYING FP05
Problem Desc: On AIX, when TEC forwarding is enabled, after applying NV714
FP05, nvserverd dies with signal 6 immediately. After disabling the StateCorrelationEngine
of nvserverd it comes up again.
Solution: (1) Add /usr/OV/jre/bin/classic in LIBPATH statement in
/usr/OV/conf/NVenvironment file.
(2) Also add following two statements in /usr/OV/conf/NVenvironment file.
LDR_CNTRL=USERREGS
export LDR_CNTRL
For example, change the line which reads
export
LIBPATH=/usr/lpp/X11/lib/R6:/usr/lpp/X11/lib/R6/Motif2.1:$LIBPATH:/usr/OV/lib
to
export
LIBPATH=/usr/OV/jre/bin/classic:/usr/lpp/X11/lib/R6:/usr/lpp/X11/lib/R6/Motif2.1:$LIBPATH:/usr/OV/lib
LDR_CNTRL=USERREGS
export LDR_CNTRL
(3) Save the file.
(4) Stop the daemons (ovstop nvsecd) then restart daemons using /etc/netnmrc.
Sean
Lawrence
Systems Automation
Technical Specialist
905-790-5728
From:
nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Michael_Noonkesser@bluecrossmn.com
Sent: February 21, 2007 3:35 PM
To: nv-l@lists.ca.ibm.com
Subject: [NV-L] nvserverd exited
on signal
Hello list-
Environment:
Netview 7.1.5 Solaris 9
I
am getting a strange error on my test and production boxes both running new
installs of NV715. This is not an upgrade install. I have:
stopped
the daemons via ovstop
stopped
nvsecd
done
a /etc/init.d/netnmrc stop
All
the following commands run as root
then
tried to restart with ovstart and netnmrc start and netview, netview
-dconsole.
The
/usr/OV/tmp/netnmrc.ovstart was no help either.
server1 # netview -dconsole
portmap
is already running
Starting
IBM Tivoli NetView daemons :
WARNING:
Daemon startup error. See /usr/OV/tmp/netnmrc.ovstart
ERROR:
The following REQUIRED daemons are not running:
nvserverd
As
root user, start all the daemons by using one of the following methods:
a) use the smit (ServerSetup) utility
b) issue the command: /usr/OV/bin/ovstart
c) rerun this command
Thanks
for any insight!!
Mike N
----------------------------
Important news about email communications:
If our
business rules identify sensitive information, you will receive a ZixMail
Secure Message with a link to view your message. First-time recipients will be
asked to create a password before they are granted access. To learn more about
ZixMail, ZixCorp Secure Email
Message Center,
and other ZixCorp offerings, please go to
http://userawareness.zixcorp.com/secure4/index.php ----------------------------
The
information contained in this communication may be confidential, and is
intended only for the use of the recipient(s) named above. If the reader of
this message is not the intended recipient, you are hereby notified that any
dissemination, distribution, or copying of this communication, or any of its
contents, is strictly prohibited. If you have received this communication in
error, please return it to the sender immediately and delete the original
message and any copy of it from your computer system. If you have any questions
concerning this message, please contact the sender.
Unencrypted,
unauthenticated Internet e-mail is inherently insecure. Internet messages may
be corrupted or incomplete, or may incorrectly identify the sender.