|
Hello again,
Hello, One thing you need to keep in mind with when using the "SNMP ipAddress" field is that it will only work for single interface devices. If you are trying to get a list of multiple interface devices you will need to approach this differently. One method using nvUtil is (which can be used for creating a smartset): # nvUtil e '(IN_SUBNET 19.39.0.0)' The only problem with this is that it is based on a calculation of IP Address and Subnet Mask to determine which hosts match. If there are incorrect Subnet Masks results could be incorrect. This calculation thing also means that you would need to have more than one entry if you were looking addresses in a contiguous set of subnets... eg. ((IN_SUBNET 192.168.254.0) && (IN_SUBNET 192.168.254.1)) If you are just wanting to get this list from the command line or a script, a .format file with the nvdbformat command could be used: ########################################################### # # NVDBFormat interface listing .format file # Modified version of interfaces.format # # Usage: nvdbformat -f <filename> # # If this file were named 'interfaces.format' it would be processed by: # # nvdbformat -f interfaces.format # ########################################################### SELECTRULE:isInterface=TRUE SELECTRULE:IP Address~19.39.*.* SELECTFIELD:1:TopM Node ID:Selection Name SELECTFIELD:2:IP Address SELECTFIELD:3:IP Subnet Mask SELECTFIELD:4:IP Status # GROUPBY:1:TopM Node ID:Selection Name SORTBY:1:IP Address # HEADER:Interface List by Selection Name HEADER:Selection Name,IP Address,IP Subnet Mask,IP Status # OUTPUT:${1},${2},${3},${4} # With some modification and cron, this could be used to create/maintain a smartset with a list of nodes that meet fit. # run nvdbformat command to get Selection Name list # run nvUtil command to create a smartset with the selection names: nvUtil a "Smartset Name" "description" "(IN '"host1" "host2"')" Hope this helps. Regards, Greg Keetch IT Specialist (Advisor), Network Services Network Management Tools Specialist Information Technology Services Americas (ITSA), Global Services, IBM Canada  Leslie Clark <lclark@us.ibm.com>
Look at the object info for a node. Nodes don't have a field 'IP Address'. That's an attribute of an interface. So you are getting a list of Selection Names of interfaces or Networks. Nodes do have a field called 'SNMP ipAddress'. Cordially, Leslie A. Clark IT Services Specialist, Network Mgmt Information Technology Services Americas IBM Global Services (248) 552-4968 Voicemail, Fax, Pager
I tried making a smartset based on ip's: nvUtil e '("IP Address" ~ "19.39.*.*")' But the results that I get are not nodes but something else: How do I make a smartset, based on a range of ip's, AND get actual nodes in it? Thanks in advance
_______________________________________________ NV-L mailing list NV-L@lists.ca.ibm.com Unsubscribe:NV-L-leave@lists.ca.ibm.com http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only) |
_______________________________________________