RE: [NV-L] Making a smart set based on ip's

["Kain, Becki \(B.\)" <bkain1@ford.com>]

thanks!

 

---

From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Greg Keetch
Sent: Thursday, May 24, 2007 3:17 PM
To: Tivoli NetView Discussions
Subject: RE: [NV-L] Making a smart set based on ip's

If you are using the "IN_SUBNET" method for creating the subnet, it is based on what NetView actually discovers...

The following will work for subnet address 192.168.1.192 with subnet mask 255.255.255.224 (/27):
# nvUtil e '(IN_SUBNET 192.168.1.192)'

If you are using the "SNMP ipAddress" database field (or any IP Address based field), you would need to use ranges:
# nvUtil e '("SNMP ipAddress" ~ "192.168.1.193-223")'

Hope this helps.

Regards,
Greg Keetch
IT Specialist (Advisor), Network Services
Network Management Tools Specialist
Information Technology Services Americas (ITSA), Global Services, IBM Canada

"Kain, Becki \(B.\)" <bkain1@ford.com>

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: nv-l-bounces@lists.ca.ibm.com

05/24/2007 07:27 AM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

To	"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject	RE: [NV-L] Making a smart set based on ip's

Next question based on this question - smartsets can 
only be made on classful boundaries, correct? is there any way to specify ./23 
or /17 in these? thanks

---

From: 
nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] 
On Behalf Of Leslie 
Clark
Sent: Tuesday, 
May 22, 2007 10:55 AM
To: Tivoli NetView Discussions
Subject: Re: [NV-L] Making a smart 
set based on ip's


Look at the object info 
for a node. Nodes don't have a field 'IP Address'. That's an attribute of an 
interface. So you are getting a list of Selection Names of interfaces or 
Networks. 
Nodes do have a field called 'SNMP 
ipAddress'. 

Cordially,

Leslie A. Clark
IT 
Services Specialist, Network Mgmt
Information Technology Services 
Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: nv-l-bounces@lists.ca.ibm.com

05/22/2007 09:51 AM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

To	"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject	[NV-L] Making a smart set based on ip's

I tried making a smartset based on 
ip's:

nvUtil e '("IP Address" ~ "19.39.*.*")'

But the results that I get are not nodes but something else:
sdg100344q3b1.itek.ford.com:19.39.25.75
sdg100g3tfmb1.itek.ford.com:19.39.40.103
SEP001380AD917D.itek.ford.com:19.39.50.110

How do I make a smartset, based on a range of ip's, AND get actual nodes in it? Thanks in advance

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)