RE: [NV-L] SNMP version 2c

["SANTA Giovanni" <Giovanni.SANTA@globalvalue.it>]

James,

The version is 7.1.4 on AIX platform, I have installed the CISCO-EPM-NOTIFICATION-MIB in order to receive any alert from access points.

With mib2trap and addtrap utility I was added these traps and I am writing a shell script in order to extract the snmp fields which I need.

I have configurate the WLSE to send the notification trap to Netview, I have seen into trapd.log these ones arrived which another Cisco tcpConnectionClose.

The OID is correct.

Thanks in advance

Giovanni

---

From: nv-l-bounces@lists.ca.ibm.com on behalf of James Shanks
Sent: Fri 12/7/2007 5:44 PM
To: Tivoli NetView Discussions
Subject: Re: [NV-L] SNMP version 2c

You did not mention what version of NetView you have nor what operating
system.

NetView for UNIX has always received SNMPv2c traps with no special set up.
You can define the trap manually with xnmtrap  or get the vendor's MIB(s)
which define(s) them and use mib2trap to create an addtrap script to define
them to trapd.

On Windows, with NetView 7.1.4 you have to reconfigure trapd to not use the
Microsoft trap service.  With 7.1.5 it installs that way.  Once again you
can use mib2trap on the vendor's MIB(s) or define the trap manually  with
trap.exe

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)