RE: [NV-L] Netview 7.1.4 No events in workspace but there in trapd.log

[Leslie Clark <lclark@us.ibm.com>]

Whenever I'm unsure that event processing
is working correctly, I do this:
ovstop nvcorrd nvserverd actionsvr
Close any event display windows
Check to make sure there are no nvcorrd,
nvserverd, or actionsvr processes running, kill them if necessary.
ovstart
Restart the events display by dragging
it off the tool bar 
type 'event'
type 'event' again
Check the end of trapd.log where you
should see a 'Node Up' (little d) event
Check the events display where you should
see the same.

If this does not work, then look for
a problem with your rulesets, including any entries you have in /usr/OV/conf/ESE.automation

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Lodge, Mabel" <Mabel.Lodge@cw.com>
Sent by: nv-l-bounces@lists.ca.ibm.com

06/09/2008 11:17 AM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

To	"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject	RE: [NV-L] Netview 7.1.4 No events in workspace but there in trapd.log

I am also getting the pop up
error on my GUI that nvevents server daemon is unable to connect to nvserverd
and that I should start nvserverd daemon. But the nvserverd daemon is running
when I check with ovstatus. Restarting it also did not help.

 

I uncommented # NvserverdTraceTecEvents=YES in the tecint.conf but see nothing being written in nvserverd.log.

 

Also, my /usr/OV/app-defaults/Nvevents is same as the as-shipped version.

 

 

Regards,

Mabel Honey Lodge

Mob - +91 99860 26874

-----Original Message-----
From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Lodge, Mabel
Sent: 09 June 2008 12:15
To: nv-l@lists.ca.ibm.com
Subject: [NV-L] No events in workspace but there in trapd.log

 

Hi,

 

I do not see any events in my Netview Events workspace although I see them in /usr/OV/log/trapd.log as well as in Event History.

 

The events are not being forwarded to TEC either. The tecint.conf looks ok and TEC server is fine.

 

Tecint.conf :

 

ServerLocation=@EventServer

TecRuleName=Prod.rs

ServerPort=0

DefaultEventClass=TEC_ITS_BASE

Type=LCF

BufferEvents=YES

UseStateCorrelation=YES

StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml

## The following four lines are for debugging the state correlation engine

# LogLevel=ALL

# TraceLevel=ALL

# LogFileName=/usr/OV/log/adptlog.out

# TraceFileName=/usr/OV/log/adpttrc.out

## The following three lines alter nvserverd default behavior

# NvserverdTraceTecEvents=YES

# NvserverdPrimeTecEvents=NO

# NvserverdSendSeverityTecEvents=YES

## LCFINSTANCE=1

 

Any idea what else should I check?

 

Regards,

Mabel Honey Lodge

Sr Project Engineer

Tivoli and Automation Support

Cable & Wireless

Mob - +91 99860 26874

 

This e-mail has been scanned for viruses by the Cable & Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/

The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.

Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ

This e-mail has been scanned for viruses by the Cable & Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/

The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.

Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)