Hi,
I did ovstop nvcorrd nvserverd actionsvr followed by ovstart and
my events were back on track. Although I had restarted nvserverd
many times before as well as tried restarting all daemons, it hadn’t helped
but somehow, restarting nvcorrd nvserverd
actionsvr helped. Thanks !!!
Regards,
Mabel
Honey Lodge
Mob -
+91 99860 26874
-----Original
Message-----
From:
nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Leslie Clark
Sent: 09 June
2008 16:30
To: Tivoli NetView Discussions
Subject: RE: [NV-L] Netview 7.1.4
No events in workspace but there in trapd.log
Whenever I'm unsure that event processing is working
correctly, I do this:
ovstop
nvcorrd nvserverd actionsvr
Close
any event display windows
Check
to make sure there are no nvcorrd, nvserverd, or actionsvr processes running,
kill them if necessary.
ovstart
Restart
the events display by dragging it off the tool bar
type
'event'
type
'event' again
Check
the end of trapd.log where you should see a 'Node Up' (little d) event
Check
the events display where you should see the same.
If
this does not work, then look for a problem with your rulesets, including any
entries you have in /usr/OV/conf/ESE.automation
Cordially,
Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager
|
"Lodge, Mabel"
<Mabel.Lodge@cw.com>
Sent
by: nv-l-bounces@lists.ca.ibm.com
06/09/2008 11:17 AM
|
Please
respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
|
|
|
To
|
"Tivoli NetView Discussions"
<nv-l@lists.ca.ibm.com>
|
|
cc
|
|
|
Subject
|
RE: [NV-L] Netview 7.1.4 No events in
workspace but there in trapd.log
|
|
I am also getting the pop up error on my GUI that
nvevents server daemon is unable to connect to nvserverd and that I should
start nvserverd daemon. But the nvserverd daemon is running when I check with
ovstatus. Restarting it also did not help.
I uncommented # NvserverdTraceTecEvents=YES in the tecint.conf
but see nothing being written in nvserverd.log.
Also, my /usr/OV/app-defaults/Nvevents is same as the
as-shipped version.
Regards,
Mabel Honey Lodge
Mob - +91 99860 26874
-----Original Message-----
From: nv-l-bounces@lists.ca.ibm.com
[mailto:nv-l-bounces@lists.ca.ibm.com] On
Behalf Of Lodge, Mabel
Sent: 09 June 2008 12:15
To: nv-l@lists.ca.ibm.com
Subject: [NV-L] No events in workspace but there in trapd.log
Hi,
I do not see any events in my Netview Events workspace
although I see them in /usr/OV/log/trapd.log as well as in Event History.
The events are not being forwarded to TEC either. The
tecint.conf looks ok and TEC server is fine.
Tecint.conf :
ServerLocation=@EventServer
TecRuleName=Prod.rs
ServerPort=0
DefaultEventClass=TEC_ITS_BASE
Type=LCF
BufferEvents=YES
UseStateCorrelation=YES
StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml
## The following
four lines are for debugging the state correlation engine
# LogLevel=ALL
# TraceLevel=ALL
#
LogFileName=/usr/OV/log/adptlog.out
#
TraceFileName=/usr/OV/log/adpttrc.out
## The following
three lines alter nvserverd default behavior
#
NvserverdTraceTecEvents=YES
#
NvserverdPrimeTecEvents=NO
#
NvserverdSendSeverityTecEvents=YES
## LCFINSTANCE=1
Any idea what else should I check?
Regards,
Mabel Honey Lodge
Sr Project Engineer
Tivoli and Automation Support
Cable & Wireless
Mob - +91 99860 26874
This e-mail has been scanned for viruses by the Cable & Wireless e-mail
security system - powered by MessageLabs. For more information on a proactive
managed e-mail security service, visit http://www.cw.com/uk/emailprotection/
The information contained in this e-mail is confidential and may also be
subject to legal privilege. It is intended only for the recipient(s) named
above. If you are not named above as a recipient, you must not read, copy,
disclose, forward or otherwise use the information contained in this email. If
you have received this e-mail in error, please notify the sender (whose contact
details are above) immediately by reply e-mail and delete the message and any
attachments without retaining any copies.
Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ
This e-mail has been scanned for viruses by the Cable & Wireless e-mail
security system - powered by MessageLabs. For more information on a proactive
managed e-mail security service, visit http://www.cw.com/uk/emailprotection/
The information contained in this e-mail is confidential and may also be
subject to legal privilege. It is intended only for the recipient(s) named
above. If you are not named above as a recipient, you must not read, copy,
disclose, forward or otherwise use the information contained in this email. If
you have received this e-mail in error, please notify the sender (whose contact
details are above) immediately by reply e-mail and delete the message and any
attachments without retaining any copies.
Cable and Wireless plc
Registered in England and Wales.Company Number 238525
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l
(Browser access limited to internal IBM'ers only)