nv-l
[Top] [All Lists]

RE: [NV-L] Events to TEC

To: "Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
Subject: RE: [NV-L] Events to TEC
From: "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
Date: Thu, 26 Mar 2009 14:09:05 -0400
Delivery-date: Thu, 26 Mar 2009 18:15:55 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OF58249D8C.5B872812-ON85257585.005333BC-85257585.0053E2D0@us.ibm.com>
List-help: <mailto:nv-l-request@lists.ca.ibm.com?subject=help>
List-id: Tivoli NetView Discussions <nv-l.lists.ca.ibm.com>
List-post: <mailto:nv-l@lists.ca.ibm.com>
List-subscribe: <http://lists.ca.ibm.com/mailman/listinfo/nv-l>, <mailto:nv-l-request@lists.ca.ibm.com?subject=subscribe>
List-unsubscribe: <http://lists.ca.ibm.com/mailman/listinfo/nv-l>, <mailto:nv-l-request@lists.ca.ibm.com?subject=unsubscribe>
Reply-to: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
Sender: nv-l-bounces@lists.ca.ibm.com
Thread-index: AcmuJgDUh9ZyjhM1TUCVp3WdNqoergAFidyg
Thread-topic: [NV-L] Events to TEC
Hello again,
 
I did not realize that the rule set editor was for editing the .rs file(s). I don't know why I could not make that connection.  I will open a PMR as I have added the trap settings node and a forward node and connected the two nodes. I do not have TEC forwarding setup yet as I am using a the control desk dynamic workspace with TEC-ITS.rs
 
How do I know if the tecits_upgrade program was run or how do I know if the TEC_ITS event class structure has been upgraded?
 
Thank you,
 


Kevin Sperry


From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of James Shanks
Sent: Thursday, March 26, 2009 11:16 AM
To: Tivoli NetView Discussions
Subject: RE: [NV-L] Events to TEC

DO NOT manually edit the file!!! The chances of messing it up are enormous. It was never meant to be edited with vi.

It looks confusing because it is meant to be edited with the ruleset editor, nvrsEdit, and half of what you see is used by the GUI display for that tool.

The Admin Guide has a whole section on creating rulesets. I suggest you read it over before attempting to modify the ruleset in the editor. BTW, the editor makes a backup copy of the file when you open it.

Basically what you are going to do is add a new trap settings node for your vendor events. You can add many of them in a single trap settings node. If you need help, your best bet is to open a PMR. Support has been helping people do this for a decade.

James Shanks
Tivoli Network Availability Management Level Three
Network Availability Management
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
Inactive hide details for "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>"Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>


          "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
          Sent by: nv-l-bounces@lists.ca.ibm.com

          03/26/2009 09:52 AM
          Please respond to
          Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>


To

"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>

cc


Subject

RE: [NV-L] Events to TEC

Hello,

using the scripts method seems straight forward but we want to poses the central control of what is sent to TEC. We are running UNIX and like the idea of using the adapter, however, adding vendor events to TEC_ITS.rs is confusing me. When I look at the file, this is what I see for example.

EventAttr35 EventAttr ForwardCorr36
Specific 0 50790442 50790442 0
ForwardCorr36 ForwardCorr
""
EventAttr37 EventAttr ForwardCorr38
Specific 0 50790419 50790419 0
ForwardCorr38 ForwardCorr
""


I looked in the manuals and cannot find information about the format of this file or field descriptions. How do I enter vendor specific events into this file? Any insight would be greatly appreciated as always.

Thank you,




Kevin Sperry


From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of James Shanks
Sent:
Wednesday, March 04, 2009 2:53 PM
To:
Tivoli NetView Discussions
Subject:
Re: [NV-L] Events to TEC

Well, that depends on how the scripts are implemented. And on what platform, UNIX and Linux or Windows. And on whether you want to forward NetView events or include vendor events too. I think you are on Linux as I recall.

In general we favor the adapter approach over scripts. All our documentation is written that way. And using an adapter daemon gives you a single point of control for starting, stopping, or modifying what you send. Plus you can log or trace what the daemon does, whereas with postemsg scripts that's not so easy.

In UNIX and Linux the adapter is implemented as part of the nvserverd daemon. You configure the event forwarding from serversetup. That creates a /usr/OV/conf/tecint/conf file. The standard ruleset for TEC forwarding is TEC_ITS.rs and it is designed to work with the netview.rls rulebase shipped in TEC 3.9. That rulebase will automatically close matching Critical and Normal events for the same host, escalate the severity of the critical events based on time open, and that sort of thing. The TEC_ITS.rs will send only NetView events that the rulebase is expecting to keep the traffic low, but you can edit it to add vendor events if you wish.

The formatting for the event sent to TEC that nvserverd will use is stored in trapd.conf for the event. There's a base set of information that will be used if none is provided. And mib2trap can be used to format vendor MIBs which describe traps into addtrap statements which will include TEC formatting if you specify that you want a baroc file created when you run mib2trap. We've tried to make this easier than writing scripts yourself.

If you want to log the events being sent to TEC, you edit the tecint.conf file and uncomment the line #NvserverdTraceTECEvents=YES, and then you can get nvserverd to reload that conf file by issuing
nvtecia -reload
This will cause nvserverd to write each event to /usr/OV/log/nvserverd.log before he gives it to the TEC library code for sending. You will have to manage that log file yourself as it will just grow and grow.

Hope this helps,

James Shanks
Tivoli Network Availability Management Level Three
Network Availability Management
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
Inactive hide details for "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>"Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>

                  "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
                  Sent by: nv-l-bounces@lists.ca.ibm.com

                  03/04/2009 02:22 PM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
To

"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject

[NV-L] Events to TEC

Hello,

Using NV 7.15 w/ FP1. We now have a need for NV integration w/ TEC. Another part of our company uses OpenView and TEC. They use scripts to forward events to TEC. I have done some research and have identified two ways to accomplish this task. Scripts and using the "serversetup" gui. Could you give insight to pros and cons of either method?

Thank you,

Kevin Sperry
IT Analyst, Data Center Monitoring Control

national
grid
7437 Henry Clay Blvd. Bldg#3

Liverpool, NY 13088

Phone: (315) 460-2688 Internal: 829-2688

Kevin.Sperry@us.ngrid.com

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error, please reply to this message and let the sender know.
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com

http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed.  If you have received this e-mail in error, please reply to this message and let the sender know.
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed.  If you have received this e-mail in error, please reply to this message and let the sender know.

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)
<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web