Hello, Joe;
I thought about that issue in your environment little more and found that
installing TEC console in
a non-TEC region would not succeed. There must be the Event Server installed in
the TMR in which you
want to install TEC consoles, i.e. binaries, etc. Sorry for misunderstanding.
You can just use a console on a TMR B node that is actually running in the TEC
TMR A. For that, you
should follow the procedure I described yesterday (except the installation).
That is, create a
console in the TEC region for a non-TEC region administrator after the
resources have been
exchanged.
Unfortunately, as I do not use TIPN yet, I am not sure if the console on the NV
box needs to be
installed or just created, i.e. run from the TEC region. I would say that the
latter is true.
Best regards,
Vladimir.
"Prokott, Joe" wrote:
> So, when you state "install consoles on nodes in TMR B", do you mean the
> install of the binary "T/EC Console" code? Or do you mean just creating
> a
> T/EC console from the remote TMR? Thanks,
>
> Joe Prokott - West Group
> Network Architect
> 610 Opperman Drive
> St. Paul, MN 55123
> Phone: 651-687-4536
> Fax: 651-687-6946
> E-mail: joe.prokott@westgroup.com
>
> -----Original Message-----
> From: Petr Vladimír [mailto:Petr@DATASYS.CZ]
> Sent: Saturday, October 24, 1998 5:38 AM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: T/EC integration with NV
>
> Hello, Joe;
>
> Basically, you should carry out the following:
>
> - let there be a two-way connection between TMR A and TMR B
> - if you want to use console in TMR B (where there is no Event Server),
> register, i.e. add the following resources into the Name Registry on the
> TMR B server in that region with the wregister command (man wregister):
> wregister -i -r EventServer
> wregister -i -r EnterpriseClient
> Then ensure that the resources have been registered by running wlookup
> -R. The resources should be in the resource list.
> - install consoles on nodes in TMR B
> - exchange resources between the regions
> - create consoles for you administrators in TMR B from TMR A, e.g. log
> in to the TMR A server and create the consoles:
> wcrtconsole -S @EventServer @ManagedNode:<TMR_B_node>
> @Administrator:<TMR_B_administrator>
> Thus you create a console on the TMR B Administrator's desktop running
> in the TMR B.
>
> That should work.
>
> Best regards,
> Vladimir.
>
> > -----Original Message-----
> > From: Prokott, Joe [SMTP:Joe.Prokott@WESTGROUP.COM]
> > Sent: Saturday, October 24, 1998 12:23 AM
> > To: NV-L@UCSBVM.UCSB.EDU
> > Subject: T/EC integration with NV
> >
> > Has anyone installed the "Tivoli NetView/T/EC Integration Adapter for
> > NetView Server" for NV 5.1? We are trying to set this up with T/EC in
> > TMR A
> > and NetView in TMR B, but are having problems installing the "T/EC
> > Console"
> > on the NetView Server (prereq. before installing the "NetView/TEC
> > Integration for NetView Server" component). The TMRs are
> > interconnected, so
> > that is not an issue. Has anyone configured T/EC/NetView this way in
> > their
> > environment? I am getting the error "EventServerGUI not found,
> > completed
> > with errors" when trying to install the T/EC Console on the NetView
> > Server.
> > Do I need to share specific resources first? Any ideas?
> >
> > Joe Prokott - West Group
> > Network Architect
> > 610 Opperman Drive
> > St. Paul, MN 55123
> > Phone: 651-687-4536
> > Fax: 651-687-6946
> > E-mail: joe.prokott@westgroup.com
--
Vladimir Petr
DATASYS
TEL +420-2-6138-8211
FAX +420-2-6138-8210
mailto:petr@datasys.cz
-----------------------------
|