Re: resend: Question on MIB data collection
I am collecting data from 5000 hubs.
I have 5000BH hubs with MCP ver 3.1.1
In my case they are centillion 100 switches in 5000 chassis.
If you have similar devices, I would recommend to use centillion
mibs rather then synoptics ( the one that you are using ).
Synoptics mibs will gather "chassis" related information.
What you need is "host module" related information - which is actually
I am using centillion private mibs for that
Hope it helps.
From: Ben-Shalom, Omer [mailto:omer.ben-shalom@INTEL.COM]
Sent: Friday, February 12, 1999 11:22 AM
Subject: resend: Question on MIB data collection
I am sending this letter as I saw no mention of my previous message on this
subject, if you did receive my previous one I apologize.
I am trying to collect MIB data for bay 5000 hubs on Netview 5.1/NT
the variables are of the type 126.96.36.199.188.8.131.52.184.108.40.206.1.4.802001 -
220.127.116.11.18.104.22.168.22.214.171.124.1.4.802012 (broadcast packets for the 12 hub
I tried pointing to the OID (found in mib browser) as instances 80200[1-9]
for example, also as instances 802001|802002|802003|802004 ...
both cases fail to collect or collect the whole table containing hundreds of
Any advise on how to get this collection to work will be most welcome.
Please also reply to my own mail address.
> * iNET: 666-6092
> * firstname.lastname@example.org
Not speaking for Intel
<<Omer Ben-Shalom (E-mail).vcf>>
Archive operated by Skills 1st Ltd
See also: The NetView Web