If this happened to me, I would be very certain that I had fat-fingered the
cut and done a copy instead. I would expect that there was still a symbol
for the subnet inside the location icon. If there were not too many nodes
on that subnet, I would delete it (from all) and do an ovtopofix and
restart netmon. If there were a lot to be lost by doing that, I would
right-mouse
on the floating symbol and delete the symbol using the context menu.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager
---------------------- Forwarded by Leslie Clark/Southfield/IBM on 04-12-99
10:57 AM ---------------------------
Matt Ashfield <mda@UNB.CA> on 04-12-99 09:59:33 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: Leslie Clark/Southfield/IBM)
Subject: Map Questions
Hi all,
I am running Netview 5.1, Framework 3.6 on AIX 4.3.2... I had a bunch of IP
subnets that I grouped into one location symbol/object. I bascially created
a location symbol, selected each IP subnet, Cut from the submap, opened up
the location symbol and Pasted them into there...Everything worked fine.
Now, the problem I having now is going in reverse. I have tried to take a
few of these subnets out of the location submap and back onto the IP
Internet map, but when I cut them from the location submap, and paste them
back into the IP Internet map, they appear with that shadow and their
connections to the router does not show up on the IP Internet map (although
it does appear in the router's submap). I have tried deleting the
connection from the router submap, in hopes that it will be re-discovered,
but it doesn't happen... I hope this description makes some sense! Any help
would be greatly appreciated...
Matt
mda@unb.ca
|
Hi all,
I am running Netview 5.1, Framework 3.6 on AIX
4.3.2... I had a bunch of IP subnets that I grouped into one location
symbol/object. I bascially created a location symbol, selected each IP subnet,
Cut from the submap, opened up the location symbol and Pasted them into
there...Everything worked fine.
Now, the problem I having now is going in
reverse. I have tried to take a few of these subnets out of the location submap
and back onto the IP Internet map, but when I cut them from the location submap,
and paste them back into the IP Internet map, they appear with that shadow and
their connections to the router does not show up on the IP Internet map
(although it does appear in the router's submap). I have tried deleting the
connection from the router submap, in hopes that it will be re-discovered, but
it doesn't happen... I hope this description makes some sense! Any help would be
greatly appreciated...
Matt
|
|