***********************************************************************
Any opinions expressed in this message are those of the sender only
and do not necessarily represent the views of WOOLWICH PLC or any
of its subsidiaries. The sender may not be authorised to give financial
advice and nothing in this message should be constructed as offering
such advice.
WOOLWICH PLC represents only WOOLWICH LIFE and WOOLWICH UNIT TRUST
MANAGERS which are regulated by the Personal Investment Authority for
Life Assurance and Unit Trust business
***********************************************************************
I am hoping someone may be able to help with a strange problem that I have
encountered whilst trying to upgrade my test box to NetView v5.1.0 (on AIX
v4.2.1).
I started the install at approximately 15:00 yesterday afternoon and by the
time I needed to leave it hadn't finished so I left it running. 19 hours
later (at 10:00 this morning) it was still running and the Install output
box was updating with the period character to show progress. Being impatient
I decided that the install should have finished and closed the window which
resulted in the following message:
A reference to an object is invalid. The object no longer exists or
is in a disconnected TMR.
Please refer to the TME 10 Framework Planning and Installation
Guide, "TME Maintenance and Troubleshooting" for details about the wchkdb
command or contact your Tivoli support provider.
Running 'wchkdb' produced no errors so I was not unduly concerned.
I then tried to apply the NetView v5.1.1 patch and received the following
message:
The following products or patches need to be installed before you
can continue with this portion of the installation: ``NVS_51''.
The following is a list of the 'NV' installation files that were created in
/tmp:
-rw-r--r-- 1 root system 2522 16 Jun 14:49
/tmp/NVS_51_ALIDB_after.debug
-rw-r--r-- 1 root system 0 16 Jun 14:49
/tmp/NVS_51_ALIDB_after.output
-rw-r--r-- 1 root system 200 16 Jun 14:49
/tmp/NVS_51_BIN_before.debug
-rw-r--r-- 1 root system 0 16 Jun 14:47
/tmp/NVS_51_BIN_before.output
-rw-r--r-- 1 root system 69528 16 Jun 14:49
/tmp/NVS_51_CONFBASE_after.debug
-rw-r--r-- 1 root system 304 16 Jun 14:49
/tmp/NVS_51_CONFBASE_after.output
-rw-r--r-- 1 root system 70545 16 Jun 15:11
/tmp/NVS_51_NVFCONF_after.error
-rw-r--r-- 1 root system 304 16 Jun 14:51
/tmp/NVS_51_NVFCONF_after.output
-rw-r--r-- 1 root system 18184 16 Jun 14:49
/tmp/NVTMP311_ALIDB_after.debug
-rw-r--r-- 1 root system 0 16 Jun 14:42
/tmp/NVTMP311_ALIDB_after.output
The only error log that I could find was /tmp/NVS_51_NVFCONF_after.error and
the last few lines are as follows:
NVS_51_NVFCONF_after.error
x s/Software+Analyser.50.gif, 550 bytes, 2 media blocks.
/usr/OV/conf
* Making links....
* Running customize script for fileset NVHELP.
* Making links....
======= Wed 16 Jun 15:10:06 1999 COMPLETED NVCONFIGURE
Migrated cron tasks
Restoring master polling settings
WARNING: Node discovery is OFF
Compiling OVw resources...
Verifying OVw resources...
NOTE: It is very important to maintain adequate free space.
Current free space in /usr/OV is 106448 KBytes.
Consider using the File System and Paging Space
Monitor.
Registering lannetDM
Starting lannetDM
Reactivating security...
The last few lines of the /tmp/update.log are as follows:
/tmp/update.log
x s/Software+Analyser.50.gif, 550 bytes, 2 media blocks.
/usr/OV/conf
* Making links....
* Running customize script for fileset NVHELP.
* Making links....
======= Wed 16 Jun 15:10:06 1999 COMPLETED NVCONFIGURE
Migrated cron tasks
Restoring master polling settings
WARNING: Node discovery is OFF
Compiling OVw resources...
Verifying OVw resources...
NOTE: It is very important to maintain adequate free space.
Current free space in /usr/OV is 106448 KBytes.
Consider using the File System and Paging Space
Monitor.
Registering lannetDM
Starting lannetDM
Reactivating security...
Any suggestions please on what I need to do to persuade the install to
complete in acceptable timeframe.
Ken Freeman
Woolwich plc
************************************************************************
The information contained in this message and any attachments are
intended solely for the use of the individual or entity to whom they
are addressed. It may contain privileged and confidential information
and if you are not the intended recipient you must not copy, distribute
or take any action in reliance on it. If you have received this email in
error please notify the system manager (ADMINISTRATOR@WOOLWICH.CO.UK).
This footnote also confirms that this email message has been swept for
the presence of computer viruses.
************************************************************************
|