Mark Sklenarik wrote:
> Did you by any chance, do a "ps -ef > /tmp/somefile" before killing the
> install process? It would help in determining where or at least we could
> get some idea of there the configuration process might be hung.
> This was a migration upgrade?
> What is "lannetDM"?
>
> The time it takes to do a migration upgrade all depends on how many other
> application also have to migrated. You still have the back so you can
> repeat the procedure once you clean up system. There is a cleanup script on
> the CD.
>
> >From the messages provided, NetView had completed installation and
> configuration, it should have been in the process of starting the deamons.
>
> Thanks Mark Sklenarik
> .
> Tivoli NetView Product Integrity
> .
>
> Ken Freeman <Ken.Freeman@WOOLWICH.CO.UK> on 06/17/99 06:51:26 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: Mark Sklenarik/Tivoli Systems)
> Subject: NetView v5.1.0 upgrade stuck?
>
> ***********************************************************************
> Any opinions expressed in this message are those of the sender only
> and do not necessarily represent the views of WOOLWICH PLC or any
> of its subsidiaries. The sender may not be authorised to give financial
> advice and nothing in this message should be constructed as offering
> such advice.
>
> WOOLWICH PLC represents only WOOLWICH LIFE and WOOLWICH UNIT TRUST
> MANAGERS which are regulated by the Personal Investment Authority for
> Life Assurance and Unit Trust business
> ***********************************************************************
> I am hoping someone may be able to help with a strange problem that I have
> encountered whilst trying to upgrade my test box to NetView v5.1.0 (on AIX
> v4.2.1).
>
> I started the install at approximately 15:00 yesterday afternoon and by the
> time I needed to leave it hadn't finished so I left it running. 19 hours
> later (at 10:00 this morning) it was still running and the Install output
> box was updating with the period character to show progress. Being
> impatient
> I decided that the install should have finished and closed the window which
> resulted in the following message:
>
> A reference to an object is invalid. The object no longer exists or
> is in a disconnected TMR.
> Please refer to the TME 10 Framework Planning and Installation
> Guide, "TME Maintenance and Troubleshooting" for details about the wchkdb
> command or contact your Tivoli support provider.
>
> Running 'wchkdb' produced no errors so I was not unduly concerned.
>
> I then tried to apply the NetView v5.1.1 patch and received the following
> message:
>
> The following products or patches need to be installed before you
> can continue with this portion of the installation: ``NVS_51''.
>
> The following is a list of the 'NV' installation files that were created in
> /tmp:
>
> -rw-r--r-- 1 root system 2522 16 Jun 14:49
> /tmp/NVS_51_ALIDB_after.debug
> -rw-r--r-- 1 root system 0 16 Jun 14:49
> /tmp/NVS_51_ALIDB_after.output
> -rw-r--r-- 1 root system 200 16 Jun 14:49
> /tmp/NVS_51_BIN_before.debug
> -rw-r--r-- 1 root system 0 16 Jun 14:47
> /tmp/NVS_51_BIN_before.output
> -rw-r--r-- 1 root system 69528 16 Jun 14:49
> /tmp/NVS_51_CONFBASE_after.debug
> -rw-r--r-- 1 root system 304 16 Jun 14:49
> /tmp/NVS_51_CONFBASE_after.output
> -rw-r--r-- 1 root system 70545 16 Jun 15:11
> /tmp/NVS_51_NVFCONF_after.error
> -rw-r--r-- 1 root system 304 16 Jun 14:51
> /tmp/NVS_51_NVFCONF_after.output
> -rw-r--r-- 1 root system 18184 16 Jun 14:49
> /tmp/NVTMP311_ALIDB_after.debug
> -rw-r--r-- 1 root system 0 16 Jun 14:42
> /tmp/NVTMP311_ALIDB_after.output
>
> The only error log that I could find was /tmp/NVS_51_NVFCONF_after.error
> and
> the last few lines are as follows:
>
> NVS_51_NVFCONF_after.error
> x s/Software+Analyser.50.gif, 550 bytes, 2 media blocks.
> /usr/OV/conf
> * Making links....
> * Running customize script for fileset NVHELP.
> * Making links....
> ======= Wed 16 Jun 15:10:06 1999 COMPLETED NVCONFIGURE
> Migrated cron tasks
> Restoring master polling settings
>
> WARNING: Node discovery is OFF
>
> Compiling OVw resources...
> Verifying OVw resources...
>
> NOTE: It is very important to maintain adequate free space.
> Current free space in /usr/OV is 106448 KBytes.
> Consider using the File System and Paging Space
> Monitor.
>
> Registering lannetDM
> Starting lannetDM
> Reactivating security...
>
> The last few lines of the /tmp/update.log are as follows:
>
> /tmp/update.log
> x s/Software+Analyser.50.gif, 550 bytes, 2 media blocks.
> /usr/OV/conf
> * Making links....
> * Running customize script for fileset NVHELP.
> * Making links....
> ======= Wed 16 Jun 15:10:06 1999 COMPLETED NVCONFIGURE
> Migrated cron tasks
> Restoring master polling settings
>
> WARNING: Node discovery is OFF
>
> Compiling OVw resources...
> Verifying OVw resources...
>
> NOTE: It is very important to maintain adequate free space.
> Current free space in /usr/OV is 106448 KBytes.
> Consider using the File System and Paging Space
> Monitor.
>
> Registering lannetDM
> Starting lannetDM
> Reactivating security...
>
> Any suggestions please on what I need to do to persuade the install to
> complete in acceptable timeframe.
>
> Ken Freeman
> Woolwich plc
> ************************************************************************
> The information contained in this message and any attachments are
> intended solely for the use of the individual or entity to whom they
> are addressed. It may contain privileged and confidential information
> and if you are not the intended recipient you must not copy, distribute
> or take any action in reliance on it. If you have received this email in
> error please notify the system manager (ADMINISTRATOR@WOOLWICH.CO.UK).
>
> This footnote also confirms that this email message has been swept for
> the presence of computer viruses.
> ************************************************************************
I had a similar problem when installing 5.1 and contacted support and posted
the problem on NV-L. I got no responses and suppost suggested I repeat the
installation. I removed all the Tivoli directories and started from scratch.
As Mark says, I had backed up everything I needed for the migration so it was
safe to do this. I was then able to do the installation without a problem. I
forget how long it took but it was certainly not hours. I could not see
anything done differently in the second installation and have no idea why
things went wrong the first time.
I can only suggest you follow Mark's advice and try again.
Jon Needes
EDS, Hook, UK
|