I had the same problem on the NT side. I had actually
had an object that was in the database and not in any
of the maps; it was actually a network segment. I
tried a very unorthodox way, I don't think it's
Netview approved, but it did work for me.
I created an object with the identical object name,
and delete the object immediately afterward. Ran
ovmapcount -u and ovtopofix -a.
I can't guarantee this works for you, but could be a
last resort.
Xu He
--- Schiffinger Ralph 2100
<Ralph.Schiffinger@ERSTEBANK.AT> wrote:
> Hi Ian,
>
> currently I've got exactly 65 of these zombies
> (bluesies).
> Until now I've found absolutely NO WAY to get rid of
> them.
> And, believe me, I really tried everything
> documented.
> And, btw, ovtopofix -r (undocumented) did not help
> either.
> Running NetView 5.1.1 / Framework 3.6 / AIX 4.2.1.0.
>
> Any (new) hints welcome.
> Thanks in advance.
> Cordially, Ralph.
> iT-AUSTRIA / OE2100 / TK
> Tel (mobil) 0664 1908469
> Tel (iT-A) 21717 58948
> FAX (iT-A) 21717 58979
> Mailto:Ralph.Schiffinger@erstebank.at
>
>
> > -----Urspr|ngliche Nachricht-----
> > Von: Genge, Ian (GECITS at ALCOA)
> [SMTP:Ian.Genge@ALCOA.COM.AU]
> > Gesendet am: Donnerstag, 12. August 1999 05:25
> > An: NV-L@UCSBVM.ucsb.edu
> > Betreff: Removing Objects from NetView
> Database
> >
> > I have been away from this mailing list for a
> while so please bear with
> > me.
> > I searched the archives and found a discussion
> thread that was similar to
> > the problem we are experiencing, but was unable to
> find a resolution to
> > the
> > problem.
> >
> > At the risk of a lot of people experiencing
> deja-vu here goes:
> >
> > We are running NetView 5.1 on AIX 4.3.2.
> >
> > We have a large number of unwanted devices (around
> 200, mostly PC's) that
> > are in our database because they are using
> addresses reserved for network
> > devices. We have modifed the seedfile to exclude
> them and I have been
> > going
> > through the maps doing a visual check and deleting
> them (Edit -> Delete
> > Object -> From All Submaps).
> >
> > I have also deleted all maps except for the one we
> are using.
> >
> > I ran ovmapcount -a and then ran ovtopofix -a, as
> per instructions. When
> > I
> > started the user interface again it synchronised
> for quite some time and
> > at
> > the end, all of the previously deleted objects
> re-appeared.
> >
> > Checking the output of ovtopofix showed that for
> each of the objects that
> > re-appeared we got the message 'not in any maps,
> updating times'. There
> > are
> > a couple of objects that were successfully deleted
> and for them we got the
> > message 'removed and not in any maps, deleting'.
> >
> > Can someone please advise how we can get these
> nodes into 'removed' status
> > so we can clear them out of the database? We
> don't want them re-appearing
> > every time we run ovtopofix.
> >
> > Many thanks,
> >
> > Ian Genge
> > Network Specialist
> > GE Capital IT Solutions (Alcoa)
> >
> >
> > Alcoa of Australia Ltd ACN 004 879 298
>
===
Xu He
Consulting Services Engineer
Network Solutions, Inc
http://www.netsol.com/consulting
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
|