I'm slightly confused about what trap definitions I have to make here....
I've created an arm trap as follows..
Enterprise: .1.3.6.1.4.1.2.6.12.5.1 (MLM_Threshold) Generic: 6
Specific:1002
I *was* going to create a rearm trap with Specific number 1003, are you
saying that I should leave the Rearm trap at its defaults (Specific Trap 2)
i.e
Enterprise: .1.3.6.1.4.1.2.6.12.5.1 (MLM_Threshold) Generic: 6
Specific:2
If so, how does NetView know that the re-arm trap is to be applied to a
specific policy icon ?
Neil Whitehead (x22808)
IT Services (Telecoms)
The Royal Bank of Scotland
Tel: 0131-523 2808
Mobile:07803 501793
e-mail: whitern@rbos.co.uk
> -----Original Message-----
> From: Leslie Clark [SMTP:lclark@US.IBM.COM]
> Sent: Wednesday, August 18, 1999 3:46 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: APM and Icon colour change...
>
>
> *** Warning : this message originates from the Internet ****
>
> Yes, you must specify the threshold and rearm traps, and they must
> be the traps provided. See them in the events configuration dialog
> under the Tivoli MLM Threshold enterprise. If it doesn't work it is
> usually because you either did or did not include the dot at the
> beginning of the enterprise specification, I can't remember which
> one. You could specify your own traps, but the traps provided are
> the ones that cause the color change for the icon.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
>
>
> Hi all,
>
> Dumb question time again.....
>
> I'm using the APM to distribute a Threshold monitoring condition to a
> bunch
> of MLMs. I'm using the Threshold monitor to ensure that a process
> (trapgend)
> is still running and if it isn't I then use an Automated action (embedded
> in
> the policy) to restart that process.
>
> Everything works fine - if trapgend isn't running I get an alert and the
> process is restarted.
>
> My question is ...
>
> What mechanism drives the colour change of the icon that APM creates for
> the
> Threshold policy ? Do I have to define a re-arm condition and a re-arm
> trap
> in order to change the icon from red (threshold condition met, trapgend
> not
> running) back to green (threshold condition not met, trapgend is
> operational) as well as the initial arm condition and arm trap...
>
>
> Neil Whitehead (x22808)
> IT Services (Telecoms)
> The Royal Bank of Scotland
> Tel: 0131-523 2808
> Mobile:07803 501793
> e-mail: whitern@rbos.co.uk
>
> The Royal Bank of Scotland plc is registered in Scotland No 90312.
> Registered
> Office: 36 St Andrew Square, Edinburgh EH2 2YB.
>
> The Royal Bank of Scotland plc is regulated by IMRO, SFA and Personal
> Investment
> Authority.
>
> This e-mail message is confidential and for use by the addressee only. If
> the
> message is received by anyone other than the addressee, please return the
> message to the sender by replying to it and then delete the message from
> your
> computer.
>
> 'Internet e-mails are not necessarily secure. The Royal Bank of Scotland
> plc
> does not accept responsibility for changes made to this message after it
> was
> sent.'
The Royal Bank of Scotland plc is registered in Scotland No 90312. Registered
Office: 36 St Andrew Square, Edinburgh EH2 2YB.
The Royal Bank of Scotland plc is regulated by IMRO, SFA and Personal
Investment Authority.
This e-mail message is confidential and for use by the addressee only. If the
message is received by anyone other than the addressee, please return the
message to the sender by replying to it and then delete the message from your
computer.
'Internet e-mails are not necessarily secure. The Royal Bank of Scotland plc
does not accept responsibility for changes made to this message after it was
sent.'
|