Found the problem. The libraries for the dynatext browser
and the binaries for the books weren't installed due to a the lack of room
in the Tivoli FS. Made the FS bigger and reinstalled both the browser and
the books.
Works fine now, thanks to all...
Steven Demets
1Sgt
CVILM
Dept Explo
Sec WAN
Tf Bemiltel: 9-2320-6099
Tf Belgacom: +32 2 2556099
Fax Bemiltel 9-2400-3777
Fax Belgacom: +32 2 7013777
email prive: Steven.Demets@village.uunet.be
<mailto:Steven.Demets@village.uunet.be>
email werk: Demets.Steven@army.mil.be
<mailto:Demets.Steven@army.mil.be>
-----Original Message-----
From: James Shanks [mailto:James_Shanks@TIVOLI.COM]
Sent: woensdag 12 januari 2000 15:37
To: NV-L@UCSBVM.ucsb.edu
Subject: Re: NetView Help doesn't start.
But the migration to 5.1 would require a re-install of the
books. They are not
migrated. Did you do that?
And 5.1.1 has no code which impacts the books. They aren't
changed between
major releases.
On AIX the default binary directory is
/usr/Tivoli/bin/aix4-r1/bin. Yours
could be different, depending on the options you used at
install time (echo
$BINDIR will show you what it is if you have sourced the
Tivoli environment).
But wherever your Tivoli binray directory is, you should
find dtext and dtextdde
there.
Do you have them?
And libdtlsit.a is in /usr/Tivoli/lib/aix4-r1 by default (or
in $LIBDIR). Is
that there?
If so, then you probably need to source the Tivoli
environment before you start
the GUI :
. /etc/Tivoli/setup_env.sh
Did you do that?
If they aren't there, then you need to re-install the books
James Shanks
Tivoli (NetView for UNIX) L3 Support
"Demets.Steven" <Demets.Steven@ARMY.MIL.BE> on 01/12/2000
09:08:06 AM
Please respond to Discussion of IBM NetView and POLYCENTER
Manager on NetView
<NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks/Tivoli Systems)
Subject: Re: NetView Help doesn't start.
Yes, I did, and everything worked fine until
I upgraded my
Netview 5.0 to 5.1 and then to 5.1.1
Steven Demets
1Sgt
CVILM
Dept Explo
Sec WAN
Tf Bemiltel: 9-2320-6099
Tf Belgacom: +32 2 2556099
Fax Bemiltel 9-2400-3777
Fax Belgacom: +32 2 7013777
email prive: Steven.Demets@village.uunet.be
<mailto:Steven.Demets@village.uunet.be>
email werk: Demets.Steven@army.mil.be
<mailto:Demets.Steven@army.mil.be>
-----Original Message-----
From: Boyce, Robert L
[mailto:robert.l.boyce@LMCO.COM]
Sent: woensdag 12 januari 2000 15:09
To: NV-L@UCSBVM.ucsb.edu
Subject: Re: NetView Help doesn't
start.
Did you source the tivoli environment?
-----Original Message-----
From: Leslie Clark
[mailto:lclark@US.IBM.COM]
Sent: Wednesday, January 12, 2000 9:01 AM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Netview Help doesn't start.
Did you install the Dynatext Browser and the
books
components from the
installation media? The online help comes
with the books -
all or nothing.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt &
Networking
Detroit
---------------------- Forwarded by Leslie
Clark/Southfield/IBM on
01/12/2000 08:59 AM
---------------------------
"Demets.Steven"
<Demets.Steven@ARMY.MIL.BE>@UCSBVM.UCSB.EDU>
on 01/12/2000
08:38:52 AM
Please respond to Discussion of IBM NetView
and POLYCENTER
Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
Sent by: Discussion of IBM NetView and
POLYCENTER Manager
on NetView
<NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc:
Subject: Netview Help doesn't start.
Hi everyone,
I've got a problem with my
NV5.1.1 on an AIX
4.2.3 for a
while now. I can't start the help. When I
look in the
nv6000.log it tels
me the following :
Could not load program
dtextdde
Could not load library
libdtlsit.a
Error was: No such file or
directory
What is libdtlsit.a, where
should it be, how
can I get it
there ?
Any comments deeply
appreciated.
Steven.
Steven Demets
1Sgt
CVILM
Dept Explo
Sec WAN
Tf Bemiltel: 9-2320-6099
Tf Belgacom: +32 2 2556099
Fax Bemiltel 9-2400-3777
Fax Belgacom: +32 2 7013777
email prive:
Steven.Demets@village.uunet.be
<mailto:Steven.Demets@village.uunet.be>
email werk:
Demets.Steven@army.mil.be
<mailto:CVILM-EXPLO-COM-WAN-TECH3@army.mil.be>
|