You may want to open a PMR to help determine whether something else is
wrong with your system to cause this, but Leslie's advice is correct.
You don't lose any NetView data by deinstalling/reinstalling the Nways
products, but if a system problem caused the corruption, it may recur.
Since this is old code, I assume it had been running correctly. You
ought to figure out what's changed recently- upgraded Netview, AIX PTF
aplied? The lppchk -v that you ran checks to be sure all of the files
are where the install information and ODM says they ought to be. Do you
have a mounted filesystem that may have failed to mount? Did somebody
delete some softlinks?
ANother thing to consider is upgrading to Nways 2.1, which is
significantly more stable than 1.2.3.
Jim Kellock.
lclark@us.ibm.com wrote:
>
> Mark, the libpath business was strictly 4.3, where the level of Motif
> changed to R6. No level of 4.2.x will get you there. A heavily patched
> 4.2.1 is a pretty good place to be.
>
> I'm wondering how the Nways 1.2.3 got broken, so I hesitate to
> advise you on it. You can stop all the Nways daemons and it should
> be ok to use smit to uninstall those parts and reinstall them. Well,
> the 8260-60 Hub Manager would best be removed by going to
> the Nways smit menu and deinstalling it from there, if it is
> probably complete enough. If I were you, I would just clean all of
> the nways off (using the Nways menu to do it) and do it over, being
> careful to only put on the parts you really want. And don't do them all
> at once.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
> =============================================================
>
> Hello,
>
> I'm hoping someone on the list may offer me tips on fixing broken Nways
> 1.2.3 CML filesets on AIX 4.2.1. When I run lppchk -v I'm told the
> following broken filesets must be installed or corrected. Is there a
> manual
> way to fix these or should I be able to stop all apps and daemons and
> reinstall?
>
> cml.8230 3.3.3.0 B 8230 Hub Manager (PSM)
> cml.8238 3.3.3.0 B 8238 Hub Manager (PSM)
> cml.8250-60 3.3.3.0 B 8250 and 8260 Manager
> cml.Jjim 3.3.3.0 B IBM Nways Manager Java jim
>
> On a possibly related subject, I see that there is a "Symptom Fix",
> (Document SF3370E) for VLAN and hub icons that are not executable. This
> document and the Nways 1.2.3 Installation Guide refer to changing the
> LIBPATH statements in four files, however both documents state that this
> problem is restriced to AIX v4.3.x. My AIX 4.2.1 was heavily patched by my
> predecessors in preparation for y2k and I'm wondering if these LIBPATH
> edits
> may now be applicable, or if applying them would cause any harm.
>
> Any input or suggestions will be greately appreciated.
>
> Thanks in advance,
>
> Mark A. Scherting
> AIX/WAN Specialist
> State of Montana
> Information Services Division
> (406) 444-0117
> mscherting@state.mt.us <mailto:mscherting@state.mt.us>
>
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
>
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
|