Connection between routers

[zuffranieri@it.ibm.com]

I'd like to correct my previous append with the same subject.
The enviroment is: AIX 4.3.3 and NetView AIX 6.0.1.
I noticed  in the NetView submap a different representation of the
connection between 3 Cisco routers.
Here is how NetView represent the connections:


Router A         Router B
     |              |
     |          Network 10.229.152
              |                                     |
              |------- Router C  --------|-

I see that the NetView draw the conection (CDN)  between router A and C
as line  and the connection between the routers C and B  draw a network
10.229.252. It seems that there is not submask problem;  the  routers A and
C are connected through the Serial Interface and router B e C are connected
in different way.  Could someone help me to understand why NetView
reppresent  these two connections in this way ?.  Is there a way to change
it ? I don't want to have in the map the symbol of Network 10.229.152 .
Here is the information regarding the interfece discovered by NetView:

Router  B

"Loopback0 Up      10.229.255.1    255.255.255.255 <None> Software
Loopback"
"Ethernet0/0  Up    10.228.2.1       255.255.254.0    0x0002FD82AA80
ethernet csmacd"
"Serial0/0.20  Up    10.229.252.2      255.255.255.252   <None> Frame
Relay"
"Dialer1     Down      172.28.228.1      255.255.0.0       <None>Point to
Point (ppp)"

Router C

"Loopback0  Up         10.229.255.250  255.255.255.255 <None> Software
Loopback   "
"FastEthernet0/0 Up  10.200.2.3  255.255.255.0  x0003E45BA400  ethernet
csmacd     "
"FastEthernet1/0      Up        10.200.12.3         255.255.255.0
0x0003E45BA41C  ethernet csmacd     "
"ATM4/0.101-aal5    Up      10.229.252.1      255.255.255.252   <None>
"AAL5 over ATM       "
"ATM4/0.100-aal5   Up        10.229.252.5      255.255.255.252  <None>
AAL5 over ATM       "
"Serial2/0:0  Up                10.229.252.9    255.255.255.252 <None>
point to point serial"


Router A

"Serial0/0  Up  10.229.252.10 255.255.255.252 <None>  point to point
serial"
"Dialer1    Down 172.28.228.3 255.255.0.0     <None>          Point to
Point (ppp)"
"Ethernet0/0 Up        10.228.6.1 255.255.254.0   0x0003E34251E0  ethernet
csmacd  "
"Loopback0  Up        10.229.255.3 255.255.255.255 <None>          Software
Loopback   "

Thanks

Fabio Zuffranieri
IBM Global Services-ITS
Via Sciangai 53-Rome 00144-ITALY
email:zuffranieri@it.ibm.com