Brent,
I'm needing to do much the same thing as you are doing here. Could I ask you
to write up a little note on how you're doing this?
Regards,
Steve Elliott
Sr. Network Mgmt. Engineer
epicRealm, Inc.
214-570-4560
-----Original Message-----
From: Brent_O'Keeffe@cisgi.com [mailto:Brent_O'Keeffe@cisgi.com]
Sent: Monday, January 08, 2001 7:24 AM
To: nv-l@tkg.com
Subject: [NV-L] Cisco Line Description
I have been trying to figure out how to have NV interogate the CISCO MIB (
for
line interface descriptions and include it in the Tools>Display Object
Information. I found out how to add the field and even where to define if
it is
to show up in the display. Now all I need to know is how to get it to
populate
the field when the Netmon process discovers the router. Is this the
oid-command
file? Do I need to write a program to poll the MIB and return the value?
I am using V6R0 on AIX 4.3
Many thanks,
Brent O'Keeffe
Cambridge Integrated Services Group, Inc.
|