nv-l
[Top] [All Lists]

Re: TEC Adapter Filter

To: nv-l@lists.tivoli.com
Subject: Re: TEC Adapter Filter
From: pweischer@mmm.com
Date: Tue, 13 Feb 2001 15:23:28 +0100

Hello James,
this works well. Thank you very much.

Best regards

Peter


|--------+------------------------->
|        |          James_Shanks@TI|
|        |          VOLI.COM       |
|        |                         |
|        |          13.02.2001     |
|        |          13:35          |
|        |          Please respond |
|        |          to IBM NetView |
|        |          Discussion     |
|        |                         |
|--------+------------------------->
  >----------------------------------------------------------------------------|
  |                                                                            |
  |     To:     NV-L@tkg.com                                                   |
  |     cc:     (bcc: Peter Weischer/GE-Europe/3M/US)                          |
  |     Subject:     Re: [NV-L] TEC Adapter Filter                             |
  >----------------------------------------------------------------------------|





You already have it.  It was put into NetView for NT 6.0 (where it didn't
work very well) and was fixed in 6.0.1.  I believe it is talked about in
the Release Notes for both releases.  In any case, just execute
\usr\ov\bin\tecconfig.bat

James Shanks
Team Leader, Level 3 Support
 Tivoli NetView for UNIX and NT


---------------------- Forwarded by James Shanks/Tivoli Systems on
02/13/2001 07:29 AM ---------------------------

pweischer@MMM.COM@tkg.com on 02/13/2001 05:39:53 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject:  Re: [NV-L] TEC Adapter Filter





Hello Leslie,
I tried to do the configuration it by hand but I did not find detailed
information regarding these filter files.
The tool you mentioned in your note, the java based TecAdapter
Configuration
tool, seems to be what we need, but I could not find anything about it,
neither
in the NetView documentation nor on the Tivoli Web page.

Can you tell me where I can get this tool?

Peter



|--------+------------------------->
|        |          "Leslie Clark" |
|        |          <lclark@us.ibm.|
|        |          com>           |
|        |                         |
|        |          13.02.2001     |
|        |          08:10          |
|        |          Please respond |
|        |          to IBM NetView |
|        |          Discussion     |
|        |                         |
|--------+------------------------->
  >
----------------------------------------------------------------------------|

  |
|
  |     To:     IBM NetView Discussion <nv-l@tkg.com>
|
  |     cc:     (bcc: Peter Weischer/GE-Europe/3M/US)
|
  |     Subject:     Re: [NV-L] TEC Adapter Filter
|
  >
----------------------------------------------------------------------------|






Peter, I have not used the new TecAdapter Configurator, but I
have done this by hand, and just reviewed a little presentation I
saw on this new function. Are you using the configurator to edit
this file, or are you trying to do it by hand? According to the
presentation, it is better to use the java tool. The default is
'filter-in'.
That  means you pick the events, and then you pick the smartsets,
and events that pass those two check are forwarded to T/EC.
It also says you can associate one or more smartsets with
each event. I suspect the operand in question is OR, though,
just as we do in the ruleset processing on Unix.  It will probably
check the event source against EACH of the smartsets, and
if it is in ANY of them, it goes. It is not clear to me, only having
seen a couple of screen shots, whether you can specify
different smartsets for different events. Perhaps not.

So my 'usual' would be Interface Up, Interface Down, Threshold,
and Rearm events, about nodes in my ToTec smartset.  Then
let the fancy work get done at the T/EC. That is a good starting
point, at any rate, and won't flood the T/EC. You can then
crank up what is in the ToTec smartset without impacting or
changing anything else.

Has anyone used this new configurator? I would imagine
that it is a big help, having done it the old way.


Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit


pweischer@MMM.COM@tkg.com on 02/13/2001 01:11:23 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject:  Re: [NV-L] TEC Adapter Filter





Hello Scott,
thank you very much for your answer, but on Netview NT there is no ruleset
editor available.

Peter


|--------+--------------------------->
|        |          "Bursik, Scott"  |
|        |          <Scott.Bursik@fri|
|        |          tolay.com>       |
|        |                           |
|        |          12.02.2001 15:53 |
|        |          Please respond to|
|        |          IBM NetView      |
|        |          Discussion       |
|        |                           |
|--------+--------------------------->
  >
----------------------------------------------------------------------------|


  |
|
  |     To:     IBM NetView Discussion <nv-l@tkg.com>
|
  |     cc:     (bcc: Peter Weischer/GE-Europe/3M/US)
|
  |     Subject:     Re: [NV-L] TEC Adapter Filter
|
  >
----------------------------------------------------------------------------|







     Create a ruleset using the ruleset editor and take advantage of the
smartset query node in the rule template. Then set up NetView to forward to
TE/C using that rule.




     pweischer@mmm.com
     02/12/2001 08:38 AM
     Please respond to IBM NetView Discussion
<nv-l@tkg.com>@SMTP@Exchange
     To:  nv-l@tkg.com@SMTP@Exchange
     cc:
     Subject:  [NV-L] TEC Adapter Filter



     Hello,
     we are running NetView NT 6.0.1 and a complete Framework environment
including
     T/EC. We use the T/EC as main event monitor for operations.
     We configured NetView NT in that way, that events are forwarded to
the T/EC by
     using the TEC adapter.
     The problem is, that the T/EC is flooded by NetView events. Then we
agreed to
     filter the NetView events on the NetView side using the
tecad_nv6k.conf file and
     the TecSmartsetFilter.conf. But we have problems understanding the
syntax of
     these filter files and how they work together.

     Our target is, that all events of some specific nodes, which are in
the
     'ImportantNodes' smartset, should be forwarded to the TE/C.

     How can this be configured?

     Thank you very much.

     Best regards

     Peter



_________________________________________________________________________
     NV-L List information and Archives: http://www.tkg.com/nv-l



_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l




_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l




_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web