What version of Exceed software is the patch below for?
|--------+------------------------------------>
| | "Darrell Singleton" |
| | <darrell.singleton@worldne|
| | t.att.net> |
| | |
| | 02/27/2001 08:27 PM |
| | Please respond to IBM |
| | NetView Discussion |
| | |
|--------+------------------------------------>
>-------------------------------------------------------------------|
| |
| To: "IBM NetView Discussion" <nv-l@tkg.com> |
| cc: |
| Client: |
| Subject: Re: [NV-L] eXceed problems with NetView |
>-------------------------------------------------------------------|
Read this:
Download and install this executable.
It contains a number of fixes for the Host access component of Exceed.
ftp://ftp.hcl.com/pub/bbs/hostex/eng7001/exceed/expatch.1033.exe
Additionally, go to Start-->Programs-->Hummingbird Conn...-->System
Administration-->Update Hummingbird Exceed.
You will need the Exceed Source on hand to do the update (Microsoft
Installer requires it.)This updates the Xserver components of Exceed.
Also, go into xconfig-->Performance and try:
-changing the maximum backing stores to Always
-check the Save Unders box
in Xconfig-->Screen Definition
-Change the window manager to "Native" and not "Default to Native", try it
out after the upgrades. Dave Dimond says this made things worse but there is
a lot of confusion with those two settings and it can make quite a
difference. (People say native but really mean "Default to Native")
If you are still experiencing problems, let me know and I will submit the
issue to the QA team.
Regards
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Chris Neilson
Technical Analyst. Exceed/Host Explorer/EIP
Hummingbird
Tel (416)496-2200 Ext.2389
Toll Free 1-877-359-4866
mailto:chris.neilson@hummingbird.com
http://www.hummingbird.com/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----- Original Message -----
From: "Gavin Newman" <NEWMANGJ@banksa.com.au>
To: <nv-l@tkg.com>
Sent: Tuesday, February 27, 2001 8:45 PM
Subject: Re: [NV-L] eXceed problems with NetView
> I too had this problem but could get around it by moving the dialog box
window once it was drawn, the redraw fixed the problem.
>
> The ultimate solution was to convince the bean-counters to buy me a Sun
box to play with.
>
> Cheers - Gavin
>
> >>> Scott.Bursik@fritolay.com 24/02/2001 05:40:13 >>>
>
> Don....good class you teach! I took it in Chicago about a year back.
>
> I had the same issues with input block not appearing when using
> eXceed. I have switched to Reflection-X and that issue seems to be
resolved,
> however I do have issues where sometimes text appears with a black
highlight
> making it unreadable. I then have to minimize and bring it back up and the
> highlighting disappears.
>
> Scott Bursik
> Fritolay
>
>
>
>
> Donald Davis <don-n-darla@worldnet.att.net>
> 02/23/2001 03:20 PM
> Please respond to IBM NetView Discussion
> <nv-l@tkg.com>@SMTP@Exchange
> To: diamond@allina.com@SMTP@Exchange
> cc: nv-l@tkg.com@SMTP@Exchange,
> exceedusers@hummingbird.com@SMTP@Exchange
> Subject: [NV-L] eXceed problems with NetView
>
> Dave,
> I do not have a fix for this "frustrating" behavior, but a
> workaround.
> Whenever the Locate dialog box opens without the input field, just
> MOVE
> the eXceed window slightly and the input field will magically
> appear.
> I would be very interested if anyone has a real solution for this
> too.
>
> I found an eXceed users forum at the Hummingbird site that I have
> also
> copied with this message.
>
> Don Davis - Tivoli Certified NetView Instructor & Consultant
> Alliance of Professionals and Consultants, Inc.
> Raleigh, NC
>
>
>
>
> On a related note, and as long as we have a thread dealing
> with emulators:
>
> I'm running eXceed, with few problems except one that's driving
> me nuts. (Admitedly, that's a short ride...)
>
> The problem I just haven't been able to fix is when doing a
> Locate > Objects > By Attribute..., and selecting something
> that requires you to enter information, e.g. IP Hostname, or
> IP Address, the dialog box comes up without the text entry
> window. There's no place to type the hostname or address...
> If you start selecting other attributes, at random, sooner or
> later the text entry portion of the window will magically
> appear, and you can go back and select the attribute you originally
> wanted to select, enter the regex and hit apply. It's frustrating
> as all heck, needless to say.
>
> My server is AIX 4.2.1, and I have exceed start a dtterm using
> /usr/dt/bin/dtterm -display xxx.xxx.xxx.xxx:0&. I tried Leslie's
> suggestion of playing with mwm, and changing the window manager
> from native to X, and the problem actually got worse. I could
> not force the text entry portion to magically appear no matter
> how hard I pounded on it.
>
> Anybody seen and/or fixed such a problem?
>
> Thanks,
>
> Dave Dimond
> Allina Health System
> Mpls, MN
>
>
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
> **********************************************************************
> ***** IMPORTANT INFORMATION *****
> This document should be read only by those persons to whom
> it is addressed and its content is not intended for use by
> any other persons. If you have received this message in
> error, please notify us immediately. Please also destroy and
> delete the message from your computer. Any unauthorised form
> of reproduction of this message is strictly prohibited.
> Bank SA is not liable for the proper and complete transmission
> of the information contained in this communication, nor for any
> delay in its receipt.
> **********************************************************************
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|